Netgear WNA3100 wifi dongle not recognized
up vote
1
down vote
favorite
I have the latest version of Ubuntu, but it will not recognize my wireless adapter (Netgear WNA3100). How do I get it to search for (any) USB device and how do I get it to use it to gain access to the internet?
usb netgear
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
asked Jul 3 '14 at 16:40
PALADIN 458S
613
add a comment |
up vote
1
down vote
favorite
I have the latest version of Ubuntu, but it will not recognize my wireless adapter (Netgear WNA3100). How do I get it to search for (any) USB device and how do I get it to use it to gain access to the internet?
usb netgear
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
asked Jul 3 '14 at 16:40
PALADIN 458S
613
There appears to be good info for setting it up onndiswrapper's SourceForge page: ndiswrapper.sourceforge.net/wiki/index.php/Netgear_WNA3100
– jvriesem
Jun 12 '17 at 20:20
add a comment |
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I have the latest version of Ubuntu, but it will not recognize my wireless adapter (Netgear WNA3100). How do I get it to search for (any) USB device and how do I get it to use it to gain access to the internet?
usb netgear
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
asked Jul 3 '14 at 16:40
PALADIN 458S
613
I have the latest version of Ubuntu, but it will not recognize my wireless adapter (Netgear WNA3100). How do I get it to search for (any) USB device and how do I get it to use it to gain access to the internet?
usb netgear
usb netgear
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
asked Jul 3 '14 at 16:40
PALADIN 458S
613
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
asked Jul 3 '14 at 16:40
PALADIN 458S
613
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
edited Nov 19 '17 at 23:42
thomasrutter
26.4k46389
26.4k46389
asked Jul 3 '14 at 16:40
PALADIN 458S
613
asked Jul 3 '14 at 16:40
PALADIN 458S
613
asked Jul 3 '14 at 16:40
PALADIN 458S
613
613
There appears to be good info for setting it up onndiswrapper's SourceForge page: ndiswrapper.sourceforge.net/wiki/index.php/Netgear_WNA3100
– jvriesem
Jun 12 '17 at 20:20
add a comment |
There appears to be good info for setting it up onndiswrapper's SourceForge page: ndiswrapper.sourceforge.net/wiki/index.php/Netgear_WNA3100
– jvriesem
Jun 12 '17 at 20:20
There appears to be good info for setting it up on
ndiswrapper's SourceForge page: ndiswrapper.sourceforge.net/wiki/index.php/Netgear_WNA3100– jvriesem
Jun 12 '17 at 20:20
There appears to be good info for setting it up on
ndiswrapper's SourceForge page: ndiswrapper.sourceforge.net/wiki/index.php/Netgear_WNA3100– jvriesem
Jun 12 '17 at 20:20
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
Just used ndiswrapper to install a WN3100-100ENS on Lubuntu 16.04.1. Almost easily, it got to the state where the driver was installed and present.
But it took much longer for me to get connected to my wireless router (with wpa2 security). So, I added wpa_gui, which seemed to get things rolling. But, still push button WPA didn't work, many manual attempts failed, mostly with password rejection. In the end, I needed "linssid" which reported that my modem expected WPA2 and TKIP -- so in wpa_gui, I used these parameters to add the "network" (SSID, etc). It connected immediately. (Before trying this, I had expected that the required connection parameters would be discovered automatically)
Actually, I just noticed that there is a status tab in wpa_gui, and you can scan for networks there. Also, the network notification applet in the task bar, seems to be unaware that I do have a wi-fi connection. You also have to run wpa_gui with "sudo" in a terminal window (even though it shows up as a menu item). On my Lubuntu system, if you use the network notification interface on the task bar, you will continously get asked for the password. Also, once you connect through wpa_gui, this task bar interface thinks that wifi is disconnected. The only interface I have found which works is wpa encryption is wpa_gui.
answered Aug 29 '16 at 20:27
CliffC
513
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f491315%2fnetgear-wna3100-wifi-dongle-not-recognized%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Just used ndiswrapper to install a WN3100-100ENS on Lubuntu 16.04.1. Almost easily, it got to the state where the driver was installed and present.
But it took much longer for me to get connected to my wireless router (with wpa2 security). So, I added wpa_gui, which seemed to get things rolling. But, still push button WPA didn't work, many manual attempts failed, mostly with password rejection. In the end, I needed "linssid" which reported that my modem expected WPA2 and TKIP -- so in wpa_gui, I used these parameters to add the "network" (SSID, etc). It connected immediately. (Before trying this, I had expected that the required connection parameters would be discovered automatically)
Actually, I just noticed that there is a status tab in wpa_gui, and you can scan for networks there. Also, the network notification applet in the task bar, seems to be unaware that I do have a wi-fi connection. You also have to run wpa_gui with "sudo" in a terminal window (even though it shows up as a menu item). On my Lubuntu system, if you use the network notification interface on the task bar, you will continously get asked for the password. Also, once you connect through wpa_gui, this task bar interface thinks that wifi is disconnected. The only interface I have found which works is wpa encryption is wpa_gui.
answered Aug 29 '16 at 20:27
CliffC
513
add a comment |
up vote
0
down vote
Just used ndiswrapper to install a WN3100-100ENS on Lubuntu 16.04.1. Almost easily, it got to the state where the driver was installed and present.
But it took much longer for me to get connected to my wireless router (with wpa2 security). So, I added wpa_gui, which seemed to get things rolling. But, still push button WPA didn't work, many manual attempts failed, mostly with password rejection. In the end, I needed "linssid" which reported that my modem expected WPA2 and TKIP -- so in wpa_gui, I used these parameters to add the "network" (SSID, etc). It connected immediately. (Before trying this, I had expected that the required connection parameters would be discovered automatically)
Actually, I just noticed that there is a status tab in wpa_gui, and you can scan for networks there. Also, the network notification applet in the task bar, seems to be unaware that I do have a wi-fi connection. You also have to run wpa_gui with "sudo" in a terminal window (even though it shows up as a menu item). On my Lubuntu system, if you use the network notification interface on the task bar, you will continously get asked for the password. Also, once you connect through wpa_gui, this task bar interface thinks that wifi is disconnected. The only interface I have found which works is wpa encryption is wpa_gui.
answered Aug 29 '16 at 20:27
CliffC
513
add a comment |
up vote
0
down vote
up vote
0
down vote
Just used ndiswrapper to install a WN3100-100ENS on Lubuntu 16.04.1. Almost easily, it got to the state where the driver was installed and present.
But it took much longer for me to get connected to my wireless router (with wpa2 security). So, I added wpa_gui, which seemed to get things rolling. But, still push button WPA didn't work, many manual attempts failed, mostly with password rejection. In the end, I needed "linssid" which reported that my modem expected WPA2 and TKIP -- so in wpa_gui, I used these parameters to add the "network" (SSID, etc). It connected immediately. (Before trying this, I had expected that the required connection parameters would be discovered automatically)
Actually, I just noticed that there is a status tab in wpa_gui, and you can scan for networks there. Also, the network notification applet in the task bar, seems to be unaware that I do have a wi-fi connection. You also have to run wpa_gui with "sudo" in a terminal window (even though it shows up as a menu item). On my Lubuntu system, if you use the network notification interface on the task bar, you will continously get asked for the password. Also, once you connect through wpa_gui, this task bar interface thinks that wifi is disconnected. The only interface I have found which works is wpa encryption is wpa_gui.
answered Aug 29 '16 at 20:27
CliffC
513
Just used ndiswrapper to install a WN3100-100ENS on Lubuntu 16.04.1. Almost easily, it got to the state where the driver was installed and present.
But it took much longer for me to get connected to my wireless router (with wpa2 security). So, I added wpa_gui, which seemed to get things rolling. But, still push button WPA didn't work, many manual attempts failed, mostly with password rejection. In the end, I needed "linssid" which reported that my modem expected WPA2 and TKIP -- so in wpa_gui, I used these parameters to add the "network" (SSID, etc). It connected immediately. (Before trying this, I had expected that the required connection parameters would be discovered automatically)
Actually, I just noticed that there is a status tab in wpa_gui, and you can scan for networks there. Also, the network notification applet in the task bar, seems to be unaware that I do have a wi-fi connection. You also have to run wpa_gui with "sudo" in a terminal window (even though it shows up as a menu item). On my Lubuntu system, if you use the network notification interface on the task bar, you will continously get asked for the password. Also, once you connect through wpa_gui, this task bar interface thinks that wifi is disconnected. The only interface I have found which works is wpa encryption is wpa_gui.
answered Aug 29 '16 at 20:27
CliffC
513
edited Aug 30 '16 at 14:33
answered Aug 29 '16 at 20:27
CliffC
513
answered Aug 29 '16 at 20:27
CliffC
513
answered Aug 29 '16 at 20:27
CliffC
513
513
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f491315%2fnetgear-wna3100-wifi-dongle-not-recognized%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
There appears to be good info for setting it up on
ndiswrapper's SourceForge page: ndiswrapper.sourceforge.net/wiki/index.php/Netgear_WNA3100– jvriesem
Jun 12 '17 at 20:20