Does changing the encryption password imply rewriting all the data?
up vote
48
down vote
favorite
10
Let's say I have 1 TB of data on a partition encrypted with BitLocker, TrueCrypt or VeraCrypt.
Does changing the encryption password imply rewriting all the data (i.e., will it take hours/days)?
windows encryption bitlocker disk-encryption
edited Nov 23 at 18:43
Run5k
10.7k72749
asked Nov 22 at 14:52
Basj
755628
add a comment |
up vote
48
down vote
favorite
10
Let's say I have 1 TB of data on a partition encrypted with BitLocker, TrueCrypt or VeraCrypt.
Does changing the encryption password imply rewriting all the data (i.e., will it take hours/days)?
windows encryption bitlocker disk-encryption
edited Nov 23 at 18:43
Run5k
10.7k72749
asked Nov 22 at 14:52
Basj
755628
1
For the record: Windows Bitlocker has no procedure to explicitly "rewrite" data. You must decrypt and re-encrypt the disk
– usr-local-ΕΨΗΕΛΩΝ
Nov 23 at 11:05
1
Related to virtually wiping an entire encrypted disk by just erasing it's key, like some encrypting hard drives can do a nearly instantaneous "wipe" of terabytes
– Xen2050
Nov 23 at 13:05
3
Related to this (although neither answer mentions it): user-chosen passwords will be both too short, and have terrible entropy (too easily guessable). So the drive is encrypted with a good key... and then the encryption key is protected with a terrible one (ah well).
– Clockwork-Muse
Nov 23 at 19:13
1
@Clockwork-Muse Still better than encrypt them with the original short key.
– gvgramazio
Nov 23 at 19:59
add a comment |
up vote
48
down vote
favorite
10
up vote
48
down vote
favorite
10
10
Let's say I have 1 TB of data on a partition encrypted with BitLocker, TrueCrypt or VeraCrypt.
Does changing the encryption password imply rewriting all the data (i.e., will it take hours/days)?
windows encryption bitlocker disk-encryption
edited Nov 23 at 18:43
Run5k
10.7k72749
asked Nov 22 at 14:52
Basj
755628
Let's say I have 1 TB of data on a partition encrypted with BitLocker, TrueCrypt or VeraCrypt.
Does changing the encryption password imply rewriting all the data (i.e., will it take hours/days)?
windows encryption bitlocker disk-encryption
windows encryption bitlocker disk-encryption
edited Nov 23 at 18:43
Run5k
10.7k72749
asked Nov 22 at 14:52
Basj
755628
edited Nov 23 at 18:43
Run5k
10.7k72749
asked Nov 22 at 14:52
Basj
755628
edited Nov 23 at 18:43
Run5k
10.7k72749
edited Nov 23 at 18:43
Run5k
10.7k72749
edited Nov 23 at 18:43
Run5k
10.7k72749
10.7k72749
asked Nov 22 at 14:52
Basj
755628
asked Nov 22 at 14:52
Basj
755628
asked Nov 22 at 14:52
Basj
755628
755628
1
For the record: Windows Bitlocker has no procedure to explicitly "rewrite" data. You must decrypt and re-encrypt the disk
– usr-local-ΕΨΗΕΛΩΝ
Nov 23 at 11:05
1
Related to virtually wiping an entire encrypted disk by just erasing it's key, like some encrypting hard drives can do a nearly instantaneous "wipe" of terabytes
– Xen2050
Nov 23 at 13:05
3
Related to this (although neither answer mentions it): user-chosen passwords will be both too short, and have terrible entropy (too easily guessable). So the drive is encrypted with a good key... and then the encryption key is protected with a terrible one (ah well).
– Clockwork-Muse
Nov 23 at 19:13
1
@Clockwork-Muse Still better than encrypt them with the original short key.
– gvgramazio
Nov 23 at 19:59
add a comment |
1
For the record: Windows Bitlocker has no procedure to explicitly "rewrite" data. You must decrypt and re-encrypt the disk
– usr-local-ΕΨΗΕΛΩΝ
Nov 23 at 11:05
1
Related to virtually wiping an entire encrypted disk by just erasing it's key, like some encrypting hard drives can do a nearly instantaneous "wipe" of terabytes
– Xen2050
Nov 23 at 13:05
3
Related to this (although neither answer mentions it): user-chosen passwords will be both too short, and have terrible entropy (too easily guessable). So the drive is encrypted with a good key... and then the encryption key is protected with a terrible one (ah well).
– Clockwork-Muse
Nov 23 at 19:13
1
@Clockwork-Muse Still better than encrypt them with the original short key.
– gvgramazio
Nov 23 at 19:59
1
1
For the record: Windows Bitlocker has no procedure to explicitly "rewrite" data. You must decrypt and re-encrypt the disk
– usr-local-ΕΨΗΕΛΩΝ
Nov 23 at 11:05
For the record: Windows Bitlocker has no procedure to explicitly "rewrite" data. You must decrypt and re-encrypt the disk
– usr-local-ΕΨΗΕΛΩΝ
Nov 23 at 11:05
1
1
Related to virtually wiping an entire encrypted disk by just erasing it's key, like some encrypting hard drives can do a nearly instantaneous "wipe" of terabytes
– Xen2050
Nov 23 at 13:05
Related to virtually wiping an entire encrypted disk by just erasing it's key, like some encrypting hard drives can do a nearly instantaneous "wipe" of terabytes
– Xen2050
Nov 23 at 13:05
3
3
Related to this (although neither answer mentions it): user-chosen passwords will be both too short, and have terrible entropy (too easily guessable). So the drive is encrypted with a good key... and then the encryption key is protected with a terrible one (ah well).
– Clockwork-Muse
Nov 23 at 19:13
Related to this (although neither answer mentions it): user-chosen passwords will be both too short, and have terrible entropy (too easily guessable). So the drive is encrypted with a good key... and then the encryption key is protected with a terrible one (ah well).
– Clockwork-Muse
Nov 23 at 19:13
1
1
@Clockwork-Muse Still better than encrypt them with the original short key.
– gvgramazio
Nov 23 at 19:59
@Clockwork-Muse Still better than encrypt them with the original short key.
– gvgramazio
Nov 23 at 19:59
add a comment |
2 Answers
2
active
oldest
votes
up vote
77
down vote
accepted
No. Your password is used to encrypt only the master key. When you change the password, the master key is reencrypted but itself does not change.
(This is how some systems, such as BitLocker or LUKS, are able to have multiple passwords for the same disk: they still use a single master key for all data, but just store multiple copies of the master key encrypted with different passwords.)
answered Nov 22 at 14:56
grawity
231k35486544
Thank you very much! Would you have a link with details about that? Is the master key saved (encrypted by password) at the beginning (very first bytes) of the partition?
– Basj
Nov 22 at 14:58
1
I don't have any useful links at hand, but see Twisty's answer regarding that.
– grawity
Nov 22 at 18:17
7
Then the next question is obvious: is it possible to change the master key?
– gvgramazio
Nov 23 at 20:01
@gvgramazio: Possibly, but that should be a separate thread – and you should mention what specific fde program that you are using and on what OS. (It's possible technically, but there might not be any tools available to actually do it.) Also mention the reason why you think changing it might be necessary...
– grawity
Nov 24 at 13:08
The reason could be almost the same as why one wants to change the password. Maybe the password has been discovered, thus the master key has been discovered. Of course, one should have access to encrypted master key but maybe its possible. If one has the suspect that the master key has been discovered changing only the password has no effect.
– gvgramazio
Nov 24 at 13:13
|
show 1 more comment
up vote
35
down vote
Grawity's answer is correct. Because encrypting data is a relatively expensive process, it makes more sense to create a single master key that does not change during the lifetime of the encrypted data. This master key can then in turn be encrypted by one or more secondary keys, which can then be flexibly changed at will.
For example, here's how BitLocker implements this (it actually uses three "layers" of keys):
- Data written to a BitLocker-protected volume is encrypted with a full-volume encryption key (FVEK). This key does not change until BitLocker is completely removed from a volume.
- The FVEK is encrypted with the volume master key (VMK) then stored (in its encrypted form) in the volume's metadata.
- The VMK in turn is encrypted with one or more key protectors, such as a PIN/password.
The following picture shows the process of accessing an encrypted system disk on a machine with BitLocker full volume encryption enabled:
More information about this process can be found on TechNet.
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
9
Note: this also means that if anyone inclined enough to get copy of decrypted FVEK while they had (perhaps legitimate) access will continue to have unrestricted access to encrypted data if they come into contact with that encrypted disk, no mater how many times you change your PIN/password/VMK. Which is rather unfortunate (IOW, most times you change your passphrase, you should instead be doing full backup/wipe/recreate with new passphrase/restore cycle manually if you want protection from such cases.)
– Matija Nalis
Nov 23 at 22:33
Quite true, though for this to be the case one would need either physical access or remote access with administrative rights. If an attacker has either of these...well, enough said.
– Twisty Impersonator
Nov 23 at 22:52
2
yes, I was thinking physical access. Full disk encryption in irrelevant from security perspective while machine is running and disk is unlocked, anyway. However, it is supposed to protect your sensitive data if machine is off and lost or stolen (think laptop in taxi or airport), tampered with (think maid paid to give access in hotel room while owner is out), or hardware-failed or about to be decommissioned - now you'll still have to do the degaussing, physical shredding and incinerating of hardware instead of just recycling it (or giving to employees or selling on ebay etc)
– Matija Nalis
Nov 23 at 23:14
3
@TwistyImpersonator The entire purpose of encrypting a disk is to protect your data when somebody has physical access. So the scenario is not moot; it is the whole point.
– Lightness Races in Orbit
Nov 24 at 0:14
1
@LightnessRacesinOrbit I realize that. My comment was made in the context of the suggested vulnerability of the VMK before encryption is complete. In that specific window of time, encryption does not protect against an attacker with physical access or remote admin rights.
– Twisty Impersonator
Nov 24 at 0:39
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1377595%2fdoes-changing-the-encryption-password-imply-rewriting-all-the-data%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
77
down vote
accepted
No. Your password is used to encrypt only the master key. When you change the password, the master key is reencrypted but itself does not change.
(This is how some systems, such as BitLocker or LUKS, are able to have multiple passwords for the same disk: they still use a single master key for all data, but just store multiple copies of the master key encrypted with different passwords.)
answered Nov 22 at 14:56
grawity
231k35486544
Thank you very much! Would you have a link with details about that? Is the master key saved (encrypted by password) at the beginning (very first bytes) of the partition?
– Basj
Nov 22 at 14:58
1
I don't have any useful links at hand, but see Twisty's answer regarding that.
– grawity
Nov 22 at 18:17
7
Then the next question is obvious: is it possible to change the master key?
– gvgramazio
Nov 23 at 20:01
@gvgramazio: Possibly, but that should be a separate thread – and you should mention what specific fde program that you are using and on what OS. (It's possible technically, but there might not be any tools available to actually do it.) Also mention the reason why you think changing it might be necessary...
– grawity
Nov 24 at 13:08
The reason could be almost the same as why one wants to change the password. Maybe the password has been discovered, thus the master key has been discovered. Of course, one should have access to encrypted master key but maybe its possible. If one has the suspect that the master key has been discovered changing only the password has no effect.
– gvgramazio
Nov 24 at 13:13
|
show 1 more comment
up vote
77
down vote
accepted
No. Your password is used to encrypt only the master key. When you change the password, the master key is reencrypted but itself does not change.
(This is how some systems, such as BitLocker or LUKS, are able to have multiple passwords for the same disk: they still use a single master key for all data, but just store multiple copies of the master key encrypted with different passwords.)
answered Nov 22 at 14:56
grawity
231k35486544
Thank you very much! Would you have a link with details about that? Is the master key saved (encrypted by password) at the beginning (very first bytes) of the partition?
– Basj
Nov 22 at 14:58
1
I don't have any useful links at hand, but see Twisty's answer regarding that.
– grawity
Nov 22 at 18:17
7
Then the next question is obvious: is it possible to change the master key?
– gvgramazio
Nov 23 at 20:01
@gvgramazio: Possibly, but that should be a separate thread – and you should mention what specific fde program that you are using and on what OS. (It's possible technically, but there might not be any tools available to actually do it.) Also mention the reason why you think changing it might be necessary...
– grawity
Nov 24 at 13:08
The reason could be almost the same as why one wants to change the password. Maybe the password has been discovered, thus the master key has been discovered. Of course, one should have access to encrypted master key but maybe its possible. If one has the suspect that the master key has been discovered changing only the password has no effect.
– gvgramazio
Nov 24 at 13:13
|
show 1 more comment
up vote
77
down vote
accepted
up vote
77
down vote
accepted
No. Your password is used to encrypt only the master key. When you change the password, the master key is reencrypted but itself does not change.
(This is how some systems, such as BitLocker or LUKS, are able to have multiple passwords for the same disk: they still use a single master key for all data, but just store multiple copies of the master key encrypted with different passwords.)
answered Nov 22 at 14:56
grawity
231k35486544
No. Your password is used to encrypt only the master key. When you change the password, the master key is reencrypted but itself does not change.
(This is how some systems, such as BitLocker or LUKS, are able to have multiple passwords for the same disk: they still use a single master key for all data, but just store multiple copies of the master key encrypted with different passwords.)
answered Nov 22 at 14:56
grawity
231k35486544
edited Nov 23 at 7:54
answered Nov 22 at 14:56
grawity
231k35486544
answered Nov 22 at 14:56
grawity
231k35486544
answered Nov 22 at 14:56
grawity
231k35486544
231k35486544
Thank you very much! Would you have a link with details about that? Is the master key saved (encrypted by password) at the beginning (very first bytes) of the partition?
– Basj
Nov 22 at 14:58
1
I don't have any useful links at hand, but see Twisty's answer regarding that.
– grawity
Nov 22 at 18:17
7
Then the next question is obvious: is it possible to change the master key?
– gvgramazio
Nov 23 at 20:01
@gvgramazio: Possibly, but that should be a separate thread – and you should mention what specific fde program that you are using and on what OS. (It's possible technically, but there might not be any tools available to actually do it.) Also mention the reason why you think changing it might be necessary...
– grawity
Nov 24 at 13:08
The reason could be almost the same as why one wants to change the password. Maybe the password has been discovered, thus the master key has been discovered. Of course, one should have access to encrypted master key but maybe its possible. If one has the suspect that the master key has been discovered changing only the password has no effect.
– gvgramazio
Nov 24 at 13:13
|
show 1 more comment
Thank you very much! Would you have a link with details about that? Is the master key saved (encrypted by password) at the beginning (very first bytes) of the partition?
– Basj
Nov 22 at 14:58
1
I don't have any useful links at hand, but see Twisty's answer regarding that.
– grawity
Nov 22 at 18:17
7
Then the next question is obvious: is it possible to change the master key?
– gvgramazio
Nov 23 at 20:01
@gvgramazio: Possibly, but that should be a separate thread – and you should mention what specific fde program that you are using and on what OS. (It's possible technically, but there might not be any tools available to actually do it.) Also mention the reason why you think changing it might be necessary...
– grawity
Nov 24 at 13:08
The reason could be almost the same as why one wants to change the password. Maybe the password has been discovered, thus the master key has been discovered. Of course, one should have access to encrypted master key but maybe its possible. If one has the suspect that the master key has been discovered changing only the password has no effect.
– gvgramazio
Nov 24 at 13:13
Thank you very much! Would you have a link with details about that? Is the master key saved (encrypted by password) at the beginning (very first bytes) of the partition?
– Basj
Nov 22 at 14:58
Thank you very much! Would you have a link with details about that? Is the master key saved (encrypted by password) at the beginning (very first bytes) of the partition?
– Basj
Nov 22 at 14:58
1
1
I don't have any useful links at hand, but see Twisty's answer regarding that.
– grawity
Nov 22 at 18:17
I don't have any useful links at hand, but see Twisty's answer regarding that.
– grawity
Nov 22 at 18:17
7
7
Then the next question is obvious: is it possible to change the master key?
– gvgramazio
Nov 23 at 20:01
Then the next question is obvious: is it possible to change the master key?
– gvgramazio
Nov 23 at 20:01
@gvgramazio: Possibly, but that should be a separate thread – and you should mention what specific fde program that you are using and on what OS. (It's possible technically, but there might not be any tools available to actually do it.) Also mention the reason why you think changing it might be necessary...
– grawity
Nov 24 at 13:08
@gvgramazio: Possibly, but that should be a separate thread – and you should mention what specific fde program that you are using and on what OS. (It's possible technically, but there might not be any tools available to actually do it.) Also mention the reason why you think changing it might be necessary...
– grawity
Nov 24 at 13:08
The reason could be almost the same as why one wants to change the password. Maybe the password has been discovered, thus the master key has been discovered. Of course, one should have access to encrypted master key but maybe its possible. If one has the suspect that the master key has been discovered changing only the password has no effect.
– gvgramazio
Nov 24 at 13:13
The reason could be almost the same as why one wants to change the password. Maybe the password has been discovered, thus the master key has been discovered. Of course, one should have access to encrypted master key but maybe its possible. If one has the suspect that the master key has been discovered changing only the password has no effect.
– gvgramazio
Nov 24 at 13:13
|
show 1 more comment
up vote
35
down vote
Grawity's answer is correct. Because encrypting data is a relatively expensive process, it makes more sense to create a single master key that does not change during the lifetime of the encrypted data. This master key can then in turn be encrypted by one or more secondary keys, which can then be flexibly changed at will.
For example, here's how BitLocker implements this (it actually uses three "layers" of keys):
- Data written to a BitLocker-protected volume is encrypted with a full-volume encryption key (FVEK). This key does not change until BitLocker is completely removed from a volume.
- The FVEK is encrypted with the volume master key (VMK) then stored (in its encrypted form) in the volume's metadata.
- The VMK in turn is encrypted with one or more key protectors, such as a PIN/password.
The following picture shows the process of accessing an encrypted system disk on a machine with BitLocker full volume encryption enabled:
More information about this process can be found on TechNet.
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
9
Note: this also means that if anyone inclined enough to get copy of decrypted FVEK while they had (perhaps legitimate) access will continue to have unrestricted access to encrypted data if they come into contact with that encrypted disk, no mater how many times you change your PIN/password/VMK. Which is rather unfortunate (IOW, most times you change your passphrase, you should instead be doing full backup/wipe/recreate with new passphrase/restore cycle manually if you want protection from such cases.)
– Matija Nalis
Nov 23 at 22:33
Quite true, though for this to be the case one would need either physical access or remote access with administrative rights. If an attacker has either of these...well, enough said.
– Twisty Impersonator
Nov 23 at 22:52
2
yes, I was thinking physical access. Full disk encryption in irrelevant from security perspective while machine is running and disk is unlocked, anyway. However, it is supposed to protect your sensitive data if machine is off and lost or stolen (think laptop in taxi or airport), tampered with (think maid paid to give access in hotel room while owner is out), or hardware-failed or about to be decommissioned - now you'll still have to do the degaussing, physical shredding and incinerating of hardware instead of just recycling it (or giving to employees or selling on ebay etc)
– Matija Nalis
Nov 23 at 23:14
3
@TwistyImpersonator The entire purpose of encrypting a disk is to protect your data when somebody has physical access. So the scenario is not moot; it is the whole point.
– Lightness Races in Orbit
Nov 24 at 0:14
1
@LightnessRacesinOrbit I realize that. My comment was made in the context of the suggested vulnerability of the VMK before encryption is complete. In that specific window of time, encryption does not protect against an attacker with physical access or remote admin rights.
– Twisty Impersonator
Nov 24 at 0:39
add a comment |
up vote
35
down vote
Grawity's answer is correct. Because encrypting data is a relatively expensive process, it makes more sense to create a single master key that does not change during the lifetime of the encrypted data. This master key can then in turn be encrypted by one or more secondary keys, which can then be flexibly changed at will.
For example, here's how BitLocker implements this (it actually uses three "layers" of keys):
- Data written to a BitLocker-protected volume is encrypted with a full-volume encryption key (FVEK). This key does not change until BitLocker is completely removed from a volume.
- The FVEK is encrypted with the volume master key (VMK) then stored (in its encrypted form) in the volume's metadata.
- The VMK in turn is encrypted with one or more key protectors, such as a PIN/password.
The following picture shows the process of accessing an encrypted system disk on a machine with BitLocker full volume encryption enabled:
More information about this process can be found on TechNet.
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
9
Note: this also means that if anyone inclined enough to get copy of decrypted FVEK while they had (perhaps legitimate) access will continue to have unrestricted access to encrypted data if they come into contact with that encrypted disk, no mater how many times you change your PIN/password/VMK. Which is rather unfortunate (IOW, most times you change your passphrase, you should instead be doing full backup/wipe/recreate with new passphrase/restore cycle manually if you want protection from such cases.)
– Matija Nalis
Nov 23 at 22:33
Quite true, though for this to be the case one would need either physical access or remote access with administrative rights. If an attacker has either of these...well, enough said.
– Twisty Impersonator
Nov 23 at 22:52
2
yes, I was thinking physical access. Full disk encryption in irrelevant from security perspective while machine is running and disk is unlocked, anyway. However, it is supposed to protect your sensitive data if machine is off and lost or stolen (think laptop in taxi or airport), tampered with (think maid paid to give access in hotel room while owner is out), or hardware-failed or about to be decommissioned - now you'll still have to do the degaussing, physical shredding and incinerating of hardware instead of just recycling it (or giving to employees or selling on ebay etc)
– Matija Nalis
Nov 23 at 23:14
3
@TwistyImpersonator The entire purpose of encrypting a disk is to protect your data when somebody has physical access. So the scenario is not moot; it is the whole point.
– Lightness Races in Orbit
Nov 24 at 0:14
1
@LightnessRacesinOrbit I realize that. My comment was made in the context of the suggested vulnerability of the VMK before encryption is complete. In that specific window of time, encryption does not protect against an attacker with physical access or remote admin rights.
– Twisty Impersonator
Nov 24 at 0:39
add a comment |
up vote
35
down vote
up vote
35
down vote
Grawity's answer is correct. Because encrypting data is a relatively expensive process, it makes more sense to create a single master key that does not change during the lifetime of the encrypted data. This master key can then in turn be encrypted by one or more secondary keys, which can then be flexibly changed at will.
For example, here's how BitLocker implements this (it actually uses three "layers" of keys):
- Data written to a BitLocker-protected volume is encrypted with a full-volume encryption key (FVEK). This key does not change until BitLocker is completely removed from a volume.
- The FVEK is encrypted with the volume master key (VMK) then stored (in its encrypted form) in the volume's metadata.
- The VMK in turn is encrypted with one or more key protectors, such as a PIN/password.
The following picture shows the process of accessing an encrypted system disk on a machine with BitLocker full volume encryption enabled:
More information about this process can be found on TechNet.
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
Grawity's answer is correct. Because encrypting data is a relatively expensive process, it makes more sense to create a single master key that does not change during the lifetime of the encrypted data. This master key can then in turn be encrypted by one or more secondary keys, which can then be flexibly changed at will.
For example, here's how BitLocker implements this (it actually uses three "layers" of keys):
- Data written to a BitLocker-protected volume is encrypted with a full-volume encryption key (FVEK). This key does not change until BitLocker is completely removed from a volume.
- The FVEK is encrypted with the volume master key (VMK) then stored (in its encrypted form) in the volume's metadata.
- The VMK in turn is encrypted with one or more key protectors, such as a PIN/password.
The following picture shows the process of accessing an encrypted system disk on a machine with BitLocker full volume encryption enabled:
More information about this process can be found on TechNet.
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
edited Nov 23 at 1:14
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
answered Nov 22 at 17:12
Twisty Impersonator
17.5k136394
17.5k136394
9
Note: this also means that if anyone inclined enough to get copy of decrypted FVEK while they had (perhaps legitimate) access will continue to have unrestricted access to encrypted data if they come into contact with that encrypted disk, no mater how many times you change your PIN/password/VMK. Which is rather unfortunate (IOW, most times you change your passphrase, you should instead be doing full backup/wipe/recreate with new passphrase/restore cycle manually if you want protection from such cases.)
– Matija Nalis
Nov 23 at 22:33
Quite true, though for this to be the case one would need either physical access or remote access with administrative rights. If an attacker has either of these...well, enough said.
– Twisty Impersonator
Nov 23 at 22:52
2
yes, I was thinking physical access. Full disk encryption in irrelevant from security perspective while machine is running and disk is unlocked, anyway. However, it is supposed to protect your sensitive data if machine is off and lost or stolen (think laptop in taxi or airport), tampered with (think maid paid to give access in hotel room while owner is out), or hardware-failed or about to be decommissioned - now you'll still have to do the degaussing, physical shredding and incinerating of hardware instead of just recycling it (or giving to employees or selling on ebay etc)
– Matija Nalis
Nov 23 at 23:14
3
@TwistyImpersonator The entire purpose of encrypting a disk is to protect your data when somebody has physical access. So the scenario is not moot; it is the whole point.
– Lightness Races in Orbit
Nov 24 at 0:14
1
@LightnessRacesinOrbit I realize that. My comment was made in the context of the suggested vulnerability of the VMK before encryption is complete. In that specific window of time, encryption does not protect against an attacker with physical access or remote admin rights.
– Twisty Impersonator
Nov 24 at 0:39
add a comment |
9
Note: this also means that if anyone inclined enough to get copy of decrypted FVEK while they had (perhaps legitimate) access will continue to have unrestricted access to encrypted data if they come into contact with that encrypted disk, no mater how many times you change your PIN/password/VMK. Which is rather unfortunate (IOW, most times you change your passphrase, you should instead be doing full backup/wipe/recreate with new passphrase/restore cycle manually if you want protection from such cases.)
– Matija Nalis
Nov 23 at 22:33
Quite true, though for this to be the case one would need either physical access or remote access with administrative rights. If an attacker has either of these...well, enough said.
– Twisty Impersonator
Nov 23 at 22:52
2
yes, I was thinking physical access. Full disk encryption in irrelevant from security perspective while machine is running and disk is unlocked, anyway. However, it is supposed to protect your sensitive data if machine is off and lost or stolen (think laptop in taxi or airport), tampered with (think maid paid to give access in hotel room while owner is out), or hardware-failed or about to be decommissioned - now you'll still have to do the degaussing, physical shredding and incinerating of hardware instead of just recycling it (or giving to employees or selling on ebay etc)
– Matija Nalis
Nov 23 at 23:14
3
@TwistyImpersonator The entire purpose of encrypting a disk is to protect your data when somebody has physical access. So the scenario is not moot; it is the whole point.
– Lightness Races in Orbit
Nov 24 at 0:14
1
@LightnessRacesinOrbit I realize that. My comment was made in the context of the suggested vulnerability of the VMK before encryption is complete. In that specific window of time, encryption does not protect against an attacker with physical access or remote admin rights.
– Twisty Impersonator
Nov 24 at 0:39
9
9
Note: this also means that if anyone inclined enough to get copy of decrypted FVEK while they had (perhaps legitimate) access will continue to have unrestricted access to encrypted data if they come into contact with that encrypted disk, no mater how many times you change your PIN/password/VMK. Which is rather unfortunate (IOW, most times you change your passphrase, you should instead be doing full backup/wipe/recreate with new passphrase/restore cycle manually if you want protection from such cases.)
– Matija Nalis
Nov 23 at 22:33
Note: this also means that if anyone inclined enough to get copy of decrypted FVEK while they had (perhaps legitimate) access will continue to have unrestricted access to encrypted data if they come into contact with that encrypted disk, no mater how many times you change your PIN/password/VMK. Which is rather unfortunate (IOW, most times you change your passphrase, you should instead be doing full backup/wipe/recreate with new passphrase/restore cycle manually if you want protection from such cases.)
– Matija Nalis
Nov 23 at 22:33
Quite true, though for this to be the case one would need either physical access or remote access with administrative rights. If an attacker has either of these...well, enough said.
– Twisty Impersonator
Nov 23 at 22:52
Quite true, though for this to be the case one would need either physical access or remote access with administrative rights. If an attacker has either of these...well, enough said.
– Twisty Impersonator
Nov 23 at 22:52
2
2
yes, I was thinking physical access. Full disk encryption in irrelevant from security perspective while machine is running and disk is unlocked, anyway. However, it is supposed to protect your sensitive data if machine is off and lost or stolen (think laptop in taxi or airport), tampered with (think maid paid to give access in hotel room while owner is out), or hardware-failed or about to be decommissioned - now you'll still have to do the degaussing, physical shredding and incinerating of hardware instead of just recycling it (or giving to employees or selling on ebay etc)
– Matija Nalis
Nov 23 at 23:14
yes, I was thinking physical access. Full disk encryption in irrelevant from security perspective while machine is running and disk is unlocked, anyway. However, it is supposed to protect your sensitive data if machine is off and lost or stolen (think laptop in taxi or airport), tampered with (think maid paid to give access in hotel room while owner is out), or hardware-failed or about to be decommissioned - now you'll still have to do the degaussing, physical shredding and incinerating of hardware instead of just recycling it (or giving to employees or selling on ebay etc)
– Matija Nalis
Nov 23 at 23:14
3
3
@TwistyImpersonator The entire purpose of encrypting a disk is to protect your data when somebody has physical access. So the scenario is not moot; it is the whole point.
– Lightness Races in Orbit
Nov 24 at 0:14
@TwistyImpersonator The entire purpose of encrypting a disk is to protect your data when somebody has physical access. So the scenario is not moot; it is the whole point.
– Lightness Races in Orbit
Nov 24 at 0:14
1
1
@LightnessRacesinOrbit I realize that. My comment was made in the context of the suggested vulnerability of the VMK before encryption is complete. In that specific window of time, encryption does not protect against an attacker with physical access or remote admin rights.
– Twisty Impersonator
Nov 24 at 0:39
@LightnessRacesinOrbit I realize that. My comment was made in the context of the suggested vulnerability of the VMK before encryption is complete. In that specific window of time, encryption does not protect against an attacker with physical access or remote admin rights.
– Twisty Impersonator
Nov 24 at 0:39
add a comment |
draft saved
draft discarded
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1377595%2fdoes-changing-the-encryption-password-imply-rewriting-all-the-data%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
For the record: Windows Bitlocker has no procedure to explicitly "rewrite" data. You must decrypt and re-encrypt the disk
– usr-local-ΕΨΗΕΛΩΝ
Nov 23 at 11:05
1
Related to virtually wiping an entire encrypted disk by just erasing it's key, like some encrypting hard drives can do a nearly instantaneous "wipe" of terabytes
– Xen2050
Nov 23 at 13:05
3
Related to this (although neither answer mentions it): user-chosen passwords will be both too short, and have terrible entropy (too easily guessable). So the drive is encrypted with a good key... and then the encryption key is protected with a terrible one (ah well).
– Clockwork-Muse
Nov 23 at 19:13
1
@Clockwork-Muse Still better than encrypt them with the original short key.
– gvgramazio
Nov 23 at 19:59