How to install and run GSconnect to have Android integration (fransfer files, send SMS/text, get notification...
up vote
2
down vote
favorite
How to install and run the Gnome extension GSconnect to connect your Android device with Ubuntu and integrate the device with Gnome Shell, Nautilus and Firefox (or Chrome) to be able to transfer files from/to phone, send SMS/text, get notification, monitor battery, sync clipboard between phone & desktop, control volume & music playback and more?
software-installation android gnome-shell-extension
add a comment |
up vote
2
down vote
favorite
How to install and run the Gnome extension GSconnect to connect your Android device with Ubuntu and integrate the device with Gnome Shell, Nautilus and Firefox (or Chrome) to be able to transfer files from/to phone, send SMS/text, get notification, monitor battery, sync clipboard between phone & desktop, control volume & music playback and more?
software-installation android gnome-shell-extension
add a comment |
up vote
2
down vote
favorite
up vote
2
down vote
favorite
How to install and run the Gnome extension GSconnect to connect your Android device with Ubuntu and integrate the device with Gnome Shell, Nautilus and Firefox (or Chrome) to be able to transfer files from/to phone, send SMS/text, get notification, monitor battery, sync clipboard between phone & desktop, control volume & music playback and more?
software-installation android gnome-shell-extension
How to install and run the Gnome extension GSconnect to connect your Android device with Ubuntu and integrate the device with Gnome Shell, Nautilus and Firefox (or Chrome) to be able to transfer files from/to phone, send SMS/text, get notification, monitor battery, sync clipboard between phone & desktop, control volume & music playback and more?
software-installation android gnome-shell-extension
software-installation android gnome-shell-extension
edited Dec 1 at 1:03
asked May 15 at 3:00
Filbuntu
2,690144474
2,690144474
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
up vote
5
down vote
accepted
1. Install GSconnect on your desktop
Open the GSconnect page on GNOME Extensions website in either the Firefox web browser (or Google Chrome).
Note: If you have not previously enabled support for GNOME Extensions you will need to do so first. Just install the following package, which provides the necessary integration for web browsers (despite the name it works with Firefox), and then load the page above.
sudo apt install chrome-gnome-shell
2. Install KDE Connect on your Phone
Next, install the KDE Connect Android app on a compatible Android phone, tablet, or Chromebook. KDE Connect for Android is available on F-Droid and from the Google Play Store:
3. Pair them!
With both requirements met you can go ahead and pair you devices!
Make sure that the Android device you’re using and your Ubuntu Linux PC are on the same network, then.
Open the KDE Connect app on your phone.
Select the “Pair a new device” option.
You should see your system’s name appear in the list of “Available devices”.
Tap your system to send a pair request to your system.
Note: It is important that you send a pair request from your phone to Ubuntu, not the other way around.
Once you accept the pair request on the Ubuntu desktop your phone/tablet will appear inside the Status Menu
on the Ubuntu desktop:
Not all features of Gsconnect are available at first. You will need to dive in and configure or set-up some of the integrations you want to use manually via the ‘plugins’ page of the KDE Connect Android app and/or the ‘mobile settings’ panel of GSconnect on your desktop.
For instance, to see your mobile device(s) in their own panel menu switch on the ‘indicator’ mode in GSconnect > Mobile Settings > Preferences
.
Here are more in-depth information and guide to install it.
And the good news, this extension may be part of Ubuntu 19.04.
Source: OMG Ubuntu.
If you have problems connecting, this might be helpful: Unable to use KDE Connect or GSconnect in Ubuntu 18.04
If you are using a firewall on ubuntu, you need to open port 1714 to 1764. If using ufw: run
sudo ufw allow 1714:1764/udp
sudo ufw allow 1714:1764/tcp
sudo ufw reload
1
Also worth noting, if you have or previously had KDE Connect installed when GSConnect was installed the extension may be forced to run on port 1717 instead of the standard 1716 which will make connecting difficult. Ensure it's uninstalled andkdeconnectd
has been killed before hand, or uninstall and then re-login.
– andy.holmes
May 16 at 0:51
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1036351%2fhow-to-install-and-run-gsconnect-to-have-android-integration-fransfer-files-se%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
5
down vote
accepted
1. Install GSconnect on your desktop
Open the GSconnect page on GNOME Extensions website in either the Firefox web browser (or Google Chrome).
Note: If you have not previously enabled support for GNOME Extensions you will need to do so first. Just install the following package, which provides the necessary integration for web browsers (despite the name it works with Firefox), and then load the page above.
sudo apt install chrome-gnome-shell
2. Install KDE Connect on your Phone
Next, install the KDE Connect Android app on a compatible Android phone, tablet, or Chromebook. KDE Connect for Android is available on F-Droid and from the Google Play Store:
3. Pair them!
With both requirements met you can go ahead and pair you devices!
Make sure that the Android device you’re using and your Ubuntu Linux PC are on the same network, then.
Open the KDE Connect app on your phone.
Select the “Pair a new device” option.
You should see your system’s name appear in the list of “Available devices”.
Tap your system to send a pair request to your system.
Note: It is important that you send a pair request from your phone to Ubuntu, not the other way around.
Once you accept the pair request on the Ubuntu desktop your phone/tablet will appear inside the Status Menu
on the Ubuntu desktop:
Not all features of Gsconnect are available at first. You will need to dive in and configure or set-up some of the integrations you want to use manually via the ‘plugins’ page of the KDE Connect Android app and/or the ‘mobile settings’ panel of GSconnect on your desktop.
For instance, to see your mobile device(s) in their own panel menu switch on the ‘indicator’ mode in GSconnect > Mobile Settings > Preferences
.
Here are more in-depth information and guide to install it.
And the good news, this extension may be part of Ubuntu 19.04.
Source: OMG Ubuntu.
If you have problems connecting, this might be helpful: Unable to use KDE Connect or GSconnect in Ubuntu 18.04
If you are using a firewall on ubuntu, you need to open port 1714 to 1764. If using ufw: run
sudo ufw allow 1714:1764/udp
sudo ufw allow 1714:1764/tcp
sudo ufw reload
1
Also worth noting, if you have or previously had KDE Connect installed when GSConnect was installed the extension may be forced to run on port 1717 instead of the standard 1716 which will make connecting difficult. Ensure it's uninstalled andkdeconnectd
has been killed before hand, or uninstall and then re-login.
– andy.holmes
May 16 at 0:51
add a comment |
up vote
5
down vote
accepted
1. Install GSconnect on your desktop
Open the GSconnect page on GNOME Extensions website in either the Firefox web browser (or Google Chrome).
Note: If you have not previously enabled support for GNOME Extensions you will need to do so first. Just install the following package, which provides the necessary integration for web browsers (despite the name it works with Firefox), and then load the page above.
sudo apt install chrome-gnome-shell
2. Install KDE Connect on your Phone
Next, install the KDE Connect Android app on a compatible Android phone, tablet, or Chromebook. KDE Connect for Android is available on F-Droid and from the Google Play Store:
3. Pair them!
With both requirements met you can go ahead and pair you devices!
Make sure that the Android device you’re using and your Ubuntu Linux PC are on the same network, then.
Open the KDE Connect app on your phone.
Select the “Pair a new device” option.
You should see your system’s name appear in the list of “Available devices”.
Tap your system to send a pair request to your system.
Note: It is important that you send a pair request from your phone to Ubuntu, not the other way around.
Once you accept the pair request on the Ubuntu desktop your phone/tablet will appear inside the Status Menu
on the Ubuntu desktop:
Not all features of Gsconnect are available at first. You will need to dive in and configure or set-up some of the integrations you want to use manually via the ‘plugins’ page of the KDE Connect Android app and/or the ‘mobile settings’ panel of GSconnect on your desktop.
For instance, to see your mobile device(s) in their own panel menu switch on the ‘indicator’ mode in GSconnect > Mobile Settings > Preferences
.
Here are more in-depth information and guide to install it.
And the good news, this extension may be part of Ubuntu 19.04.
Source: OMG Ubuntu.
If you have problems connecting, this might be helpful: Unable to use KDE Connect or GSconnect in Ubuntu 18.04
If you are using a firewall on ubuntu, you need to open port 1714 to 1764. If using ufw: run
sudo ufw allow 1714:1764/udp
sudo ufw allow 1714:1764/tcp
sudo ufw reload
1
Also worth noting, if you have or previously had KDE Connect installed when GSConnect was installed the extension may be forced to run on port 1717 instead of the standard 1716 which will make connecting difficult. Ensure it's uninstalled andkdeconnectd
has been killed before hand, or uninstall and then re-login.
– andy.holmes
May 16 at 0:51
add a comment |
up vote
5
down vote
accepted
up vote
5
down vote
accepted
1. Install GSconnect on your desktop
Open the GSconnect page on GNOME Extensions website in either the Firefox web browser (or Google Chrome).
Note: If you have not previously enabled support for GNOME Extensions you will need to do so first. Just install the following package, which provides the necessary integration for web browsers (despite the name it works with Firefox), and then load the page above.
sudo apt install chrome-gnome-shell
2. Install KDE Connect on your Phone
Next, install the KDE Connect Android app on a compatible Android phone, tablet, or Chromebook. KDE Connect for Android is available on F-Droid and from the Google Play Store:
3. Pair them!
With both requirements met you can go ahead and pair you devices!
Make sure that the Android device you’re using and your Ubuntu Linux PC are on the same network, then.
Open the KDE Connect app on your phone.
Select the “Pair a new device” option.
You should see your system’s name appear in the list of “Available devices”.
Tap your system to send a pair request to your system.
Note: It is important that you send a pair request from your phone to Ubuntu, not the other way around.
Once you accept the pair request on the Ubuntu desktop your phone/tablet will appear inside the Status Menu
on the Ubuntu desktop:
Not all features of Gsconnect are available at first. You will need to dive in and configure or set-up some of the integrations you want to use manually via the ‘plugins’ page of the KDE Connect Android app and/or the ‘mobile settings’ panel of GSconnect on your desktop.
For instance, to see your mobile device(s) in their own panel menu switch on the ‘indicator’ mode in GSconnect > Mobile Settings > Preferences
.
Here are more in-depth information and guide to install it.
And the good news, this extension may be part of Ubuntu 19.04.
Source: OMG Ubuntu.
If you have problems connecting, this might be helpful: Unable to use KDE Connect or GSconnect in Ubuntu 18.04
If you are using a firewall on ubuntu, you need to open port 1714 to 1764. If using ufw: run
sudo ufw allow 1714:1764/udp
sudo ufw allow 1714:1764/tcp
sudo ufw reload
1. Install GSconnect on your desktop
Open the GSconnect page on GNOME Extensions website in either the Firefox web browser (or Google Chrome).
Note: If you have not previously enabled support for GNOME Extensions you will need to do so first. Just install the following package, which provides the necessary integration for web browsers (despite the name it works with Firefox), and then load the page above.
sudo apt install chrome-gnome-shell
2. Install KDE Connect on your Phone
Next, install the KDE Connect Android app on a compatible Android phone, tablet, or Chromebook. KDE Connect for Android is available on F-Droid and from the Google Play Store:
3. Pair them!
With both requirements met you can go ahead and pair you devices!
Make sure that the Android device you’re using and your Ubuntu Linux PC are on the same network, then.
Open the KDE Connect app on your phone.
Select the “Pair a new device” option.
You should see your system’s name appear in the list of “Available devices”.
Tap your system to send a pair request to your system.
Note: It is important that you send a pair request from your phone to Ubuntu, not the other way around.
Once you accept the pair request on the Ubuntu desktop your phone/tablet will appear inside the Status Menu
on the Ubuntu desktop:
Not all features of Gsconnect are available at first. You will need to dive in and configure or set-up some of the integrations you want to use manually via the ‘plugins’ page of the KDE Connect Android app and/or the ‘mobile settings’ panel of GSconnect on your desktop.
For instance, to see your mobile device(s) in their own panel menu switch on the ‘indicator’ mode in GSconnect > Mobile Settings > Preferences
.
Here are more in-depth information and guide to install it.
And the good news, this extension may be part of Ubuntu 19.04.
Source: OMG Ubuntu.
If you have problems connecting, this might be helpful: Unable to use KDE Connect or GSconnect in Ubuntu 18.04
If you are using a firewall on ubuntu, you need to open port 1714 to 1764. If using ufw: run
sudo ufw allow 1714:1764/udp
sudo ufw allow 1714:1764/tcp
sudo ufw reload
edited Dec 1 at 0:58
answered May 15 at 3:00
Filbuntu
2,690144474
2,690144474
1
Also worth noting, if you have or previously had KDE Connect installed when GSConnect was installed the extension may be forced to run on port 1717 instead of the standard 1716 which will make connecting difficult. Ensure it's uninstalled andkdeconnectd
has been killed before hand, or uninstall and then re-login.
– andy.holmes
May 16 at 0:51
add a comment |
1
Also worth noting, if you have or previously had KDE Connect installed when GSConnect was installed the extension may be forced to run on port 1717 instead of the standard 1716 which will make connecting difficult. Ensure it's uninstalled andkdeconnectd
has been killed before hand, or uninstall and then re-login.
– andy.holmes
May 16 at 0:51
1
1
Also worth noting, if you have or previously had KDE Connect installed when GSConnect was installed the extension may be forced to run on port 1717 instead of the standard 1716 which will make connecting difficult. Ensure it's uninstalled and
kdeconnectd
has been killed before hand, or uninstall and then re-login.– andy.holmes
May 16 at 0:51
Also worth noting, if you have or previously had KDE Connect installed when GSConnect was installed the extension may be forced to run on port 1717 instead of the standard 1716 which will make connecting difficult. Ensure it's uninstalled and
kdeconnectd
has been killed before hand, or uninstall and then re-login.– andy.holmes
May 16 at 0:51
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1036351%2fhow-to-install-and-run-gsconnect-to-have-android-integration-fransfer-files-se%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown