Can't print on Brother DCP 1612W
I would really appreciate some help as I have spent several days trying to figure out what is going on.
I have recently bought new printer Brother DCP-1612W and would like to use. Ubuntu 14.04.2 LTS. CUPS finds the printer as wireless printer:
Description: Brother DCP-1610W series
Location:
Driver: Brother DCP-1610W for CUPS (grayscale, 2-sided printing)
Connection: dnssd://Brother%20DCP-1610W%20series._pdl-datastream._tcp.local/
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
or as USB printer when the cable is connected:
Connection: usb://Brother/DCP-1610W%20series?serial=E74238J5N865607
But I can't print. Nothing comes out. I have MAC notebook where installation went paint free and wireless printing works fine.
I will really appreciate any help. Thanks in advance.
printing brother
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
add a comment |
I would really appreciate some help as I have spent several days trying to figure out what is going on.
I have recently bought new printer Brother DCP-1612W and would like to use. Ubuntu 14.04.2 LTS. CUPS finds the printer as wireless printer:
Description: Brother DCP-1610W series
Location:
Driver: Brother DCP-1610W for CUPS (grayscale, 2-sided printing)
Connection: dnssd://Brother%20DCP-1610W%20series._pdl-datastream._tcp.local/
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
or as USB printer when the cable is connected:
Connection: usb://Brother/DCP-1610W%20series?serial=E74238J5N865607
But I can't print. Nothing comes out. I have MAC notebook where installation went paint free and wireless printing works fine.
I will really appreciate any help. Thanks in advance.
printing brother
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
add a comment |
I would really appreciate some help as I have spent several days trying to figure out what is going on.
I have recently bought new printer Brother DCP-1612W and would like to use. Ubuntu 14.04.2 LTS. CUPS finds the printer as wireless printer:
Description: Brother DCP-1610W series
Location:
Driver: Brother DCP-1610W for CUPS (grayscale, 2-sided printing)
Connection: dnssd://Brother%20DCP-1610W%20series._pdl-datastream._tcp.local/
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
or as USB printer when the cable is connected:
Connection: usb://Brother/DCP-1610W%20series?serial=E74238J5N865607
But I can't print. Nothing comes out. I have MAC notebook where installation went paint free and wireless printing works fine.
I will really appreciate any help. Thanks in advance.
printing brother
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
I would really appreciate some help as I have spent several days trying to figure out what is going on.
I have recently bought new printer Brother DCP-1612W and would like to use. Ubuntu 14.04.2 LTS. CUPS finds the printer as wireless printer:
Description: Brother DCP-1610W series
Location:
Driver: Brother DCP-1610W for CUPS (grayscale, 2-sided printing)
Connection: dnssd://Brother%20DCP-1610W%20series._pdl-datastream._tcp.local/
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
or as USB printer when the cable is connected:
Connection: usb://Brother/DCP-1610W%20series?serial=E74238J5N865607
But I can't print. Nothing comes out. I have MAC notebook where installation went paint free and wireless printing works fine.
I will really appreciate any help. Thanks in advance.
printing brother
printing brother
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
asked Dec 24 '15 at 22:43
CoderCoderCoderCoder
162
162
add a comment |
add a comment |
3 Answers
3
active
oldest
votes
Test this:
Download the drivers:
http://download.brother.com/welcome/dlf101533/dcp1610wlpr-3.0.1-1.i386.deb
http://download.brother.com/welcome/dlf101532/dcp1610wcupswrapper-3.0.1-1.i386.deb
Install the drivers:
Turn on the printer and connect the usb, network or parallel cable.
Go to the directory where the drivers are.
Run it:
sudo -i
dpkg -i --force-all dcp1610wlpr-3.0.1-1.i386.deb
dpkg -i --force-all dcp1610wcupswrapper-3.0.1-1.i386.deb
nano /etc/printcap
Edit the /etc/printcap file according to your connection.
For USB Connection:
Check if the parameter of :lp is :lp=/dev/usb/lp0
For Network Connection:
Replace :lp line to the following 2 lines:
:rm=(ip address of your printer)
:rp=lp
Restart the PC.
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
Thanks lot. I purged the drivers and did it again from the scratch as you explained. I don't know what I have done differently but it worked this time. May be the order of LPR and CUPS driver or restarting PC at the end ....it works fine now.
– CoderCoder
Dec 26 '15 at 18:38
Hey. I've an opened question regarding something similar askubuntu.com/questions/814327/… I'm trying to re-install using dpkg using your commands but I get the following error: pastebin.com/76JEPJPm
– iamatrain
Aug 21 '16 at 10:25
add a comment |
Under Ubuntu 16.04.1 x64
I did the installation as instructed on the Brother site. Everything went well at first glance, but after looking back at the terminal I noticed this:
Aucune version du paquet ia32-libs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source
Cependant les paquets suivants le remplacent :
lib32z1 lib32ncurses5 lib32bz2-1.0
Sorry for the French version. Loosely translated it says: No version of the package ia32-libs available.
So, after installing the 3 packages before mentioned, the printer is working just fine!
answered May 23 '17 at 16:13
photon0photon0
11
add a comment |
I was able to print on a Brother DCP-1612W with my Ubuntu 18.04 using WLAN.
After setting up WLAN for the printer and connecting my printer and laptop with the corresponding WLAN, I used the system-config-printer tool. I started adding a new printer. The tool detected the printer letting it appear on the list and suggesting an LPD/LPR and a AppSocket/JetDirect connection. I chose the latter. The driver wizard pointed me to a Brother DCP-1510 driver. Although not quite my printer model, using that driver, I was able to use the wireless printer as far as I needed it. Done for me!
Hope to have helped.
answered Jan 4 at 8:26
MarioMario
14319
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f713198%2fcant-print-on-brother-dcp-1612w%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
Test this:
Download the drivers:
http://download.brother.com/welcome/dlf101533/dcp1610wlpr-3.0.1-1.i386.deb
http://download.brother.com/welcome/dlf101532/dcp1610wcupswrapper-3.0.1-1.i386.deb
Install the drivers:
Turn on the printer and connect the usb, network or parallel cable.
Go to the directory where the drivers are.
Run it:
sudo -i
dpkg -i --force-all dcp1610wlpr-3.0.1-1.i386.deb
dpkg -i --force-all dcp1610wcupswrapper-3.0.1-1.i386.deb
nano /etc/printcap
Edit the /etc/printcap file according to your connection.
For USB Connection:
Check if the parameter of :lp is :lp=/dev/usb/lp0
For Network Connection:
Replace :lp line to the following 2 lines:
:rm=(ip address of your printer)
:rp=lp
Restart the PC.
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
Thanks lot. I purged the drivers and did it again from the scratch as you explained. I don't know what I have done differently but it worked this time. May be the order of LPR and CUPS driver or restarting PC at the end ....it works fine now.
– CoderCoder
Dec 26 '15 at 18:38
Hey. I've an opened question regarding something similar askubuntu.com/questions/814327/… I'm trying to re-install using dpkg using your commands but I get the following error: pastebin.com/76JEPJPm
– iamatrain
Aug 21 '16 at 10:25
add a comment |
Test this:
Download the drivers:
http://download.brother.com/welcome/dlf101533/dcp1610wlpr-3.0.1-1.i386.deb
http://download.brother.com/welcome/dlf101532/dcp1610wcupswrapper-3.0.1-1.i386.deb
Install the drivers:
Turn on the printer and connect the usb, network or parallel cable.
Go to the directory where the drivers are.
Run it:
sudo -i
dpkg -i --force-all dcp1610wlpr-3.0.1-1.i386.deb
dpkg -i --force-all dcp1610wcupswrapper-3.0.1-1.i386.deb
nano /etc/printcap
Edit the /etc/printcap file according to your connection.
For USB Connection:
Check if the parameter of :lp is :lp=/dev/usb/lp0
For Network Connection:
Replace :lp line to the following 2 lines:
:rm=(ip address of your printer)
:rp=lp
Restart the PC.
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
Thanks lot. I purged the drivers and did it again from the scratch as you explained. I don't know what I have done differently but it worked this time. May be the order of LPR and CUPS driver or restarting PC at the end ....it works fine now.
– CoderCoder
Dec 26 '15 at 18:38
Hey. I've an opened question regarding something similar askubuntu.com/questions/814327/… I'm trying to re-install using dpkg using your commands but I get the following error: pastebin.com/76JEPJPm
– iamatrain
Aug 21 '16 at 10:25
add a comment |
Test this:
Download the drivers:
http://download.brother.com/welcome/dlf101533/dcp1610wlpr-3.0.1-1.i386.deb
http://download.brother.com/welcome/dlf101532/dcp1610wcupswrapper-3.0.1-1.i386.deb
Install the drivers:
Turn on the printer and connect the usb, network or parallel cable.
Go to the directory where the drivers are.
Run it:
sudo -i
dpkg -i --force-all dcp1610wlpr-3.0.1-1.i386.deb
dpkg -i --force-all dcp1610wcupswrapper-3.0.1-1.i386.deb
nano /etc/printcap
Edit the /etc/printcap file according to your connection.
For USB Connection:
Check if the parameter of :lp is :lp=/dev/usb/lp0
For Network Connection:
Replace :lp line to the following 2 lines:
:rm=(ip address of your printer)
:rp=lp
Restart the PC.
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
Test this:
Download the drivers:
http://download.brother.com/welcome/dlf101533/dcp1610wlpr-3.0.1-1.i386.deb
http://download.brother.com/welcome/dlf101532/dcp1610wcupswrapper-3.0.1-1.i386.deb
Install the drivers:
Turn on the printer and connect the usb, network or parallel cable.
Go to the directory where the drivers are.
Run it:
sudo -i
dpkg -i --force-all dcp1610wlpr-3.0.1-1.i386.deb
dpkg -i --force-all dcp1610wcupswrapper-3.0.1-1.i386.deb
nano /etc/printcap
Edit the /etc/printcap file according to your connection.
For USB Connection:
Check if the parameter of :lp is :lp=/dev/usb/lp0
For Network Connection:
Replace :lp line to the following 2 lines:
:rm=(ip address of your printer)
:rp=lp
Restart the PC.
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
answered Dec 24 '15 at 23:35
kyodakekyodake
9,69011932
9,69011932
Thanks lot. I purged the drivers and did it again from the scratch as you explained. I don't know what I have done differently but it worked this time. May be the order of LPR and CUPS driver or restarting PC at the end ....it works fine now.
– CoderCoder
Dec 26 '15 at 18:38
Hey. I've an opened question regarding something similar askubuntu.com/questions/814327/… I'm trying to re-install using dpkg using your commands but I get the following error: pastebin.com/76JEPJPm
– iamatrain
Aug 21 '16 at 10:25
add a comment |
Thanks lot. I purged the drivers and did it again from the scratch as you explained. I don't know what I have done differently but it worked this time. May be the order of LPR and CUPS driver or restarting PC at the end ....it works fine now.
– CoderCoder
Dec 26 '15 at 18:38
Hey. I've an opened question regarding something similar askubuntu.com/questions/814327/… I'm trying to re-install using dpkg using your commands but I get the following error: pastebin.com/76JEPJPm
– iamatrain
Aug 21 '16 at 10:25
Thanks lot. I purged the drivers and did it again from the scratch as you explained. I don't know what I have done differently but it worked this time. May be the order of LPR and CUPS driver or restarting PC at the end ....it works fine now.
– CoderCoder
Dec 26 '15 at 18:38
Thanks lot. I purged the drivers and did it again from the scratch as you explained. I don't know what I have done differently but it worked this time. May be the order of LPR and CUPS driver or restarting PC at the end ....it works fine now.
– CoderCoder
Dec 26 '15 at 18:38
Hey. I've an opened question regarding something similar askubuntu.com/questions/814327/… I'm trying to re-install using dpkg using your commands but I get the following error: pastebin.com/76JEPJPm
– iamatrain
Aug 21 '16 at 10:25
Hey. I've an opened question regarding something similar askubuntu.com/questions/814327/… I'm trying to re-install using dpkg using your commands but I get the following error: pastebin.com/76JEPJPm
– iamatrain
Aug 21 '16 at 10:25
add a comment |
Under Ubuntu 16.04.1 x64
I did the installation as instructed on the Brother site. Everything went well at first glance, but after looking back at the terminal I noticed this:
Aucune version du paquet ia32-libs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source
Cependant les paquets suivants le remplacent :
lib32z1 lib32ncurses5 lib32bz2-1.0
Sorry for the French version. Loosely translated it says: No version of the package ia32-libs available.
So, after installing the 3 packages before mentioned, the printer is working just fine!
answered May 23 '17 at 16:13
photon0photon0
11
add a comment |
Under Ubuntu 16.04.1 x64
I did the installation as instructed on the Brother site. Everything went well at first glance, but after looking back at the terminal I noticed this:
Aucune version du paquet ia32-libs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source
Cependant les paquets suivants le remplacent :
lib32z1 lib32ncurses5 lib32bz2-1.0
Sorry for the French version. Loosely translated it says: No version of the package ia32-libs available.
So, after installing the 3 packages before mentioned, the printer is working just fine!
answered May 23 '17 at 16:13
photon0photon0
11
add a comment |
Under Ubuntu 16.04.1 x64
I did the installation as instructed on the Brother site. Everything went well at first glance, but after looking back at the terminal I noticed this:
Aucune version du paquet ia32-libs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source
Cependant les paquets suivants le remplacent :
lib32z1 lib32ncurses5 lib32bz2-1.0
Sorry for the French version. Loosely translated it says: No version of the package ia32-libs available.
So, after installing the 3 packages before mentioned, the printer is working just fine!
answered May 23 '17 at 16:13
photon0photon0
11
Under Ubuntu 16.04.1 x64
I did the installation as instructed on the Brother site. Everything went well at first glance, but after looking back at the terminal I noticed this:
Aucune version du paquet ia32-libs n'est disponible, mais il existe dans la base
de données. Cela signifie en général que le paquet est manquant, qu'il est devenu obsolète
ou qu'il n'est disponible que sur une autre source
Cependant les paquets suivants le remplacent :
lib32z1 lib32ncurses5 lib32bz2-1.0
Sorry for the French version. Loosely translated it says: No version of the package ia32-libs available.
So, after installing the 3 packages before mentioned, the printer is working just fine!
answered May 23 '17 at 16:13
photon0photon0
11
answered May 23 '17 at 16:13
photon0photon0
11
answered May 23 '17 at 16:13
photon0photon0
11
answered May 23 '17 at 16:13
photon0photon0
11
11
add a comment |
add a comment |
I was able to print on a Brother DCP-1612W with my Ubuntu 18.04 using WLAN.
After setting up WLAN for the printer and connecting my printer and laptop with the corresponding WLAN, I used the system-config-printer tool. I started adding a new printer. The tool detected the printer letting it appear on the list and suggesting an LPD/LPR and a AppSocket/JetDirect connection. I chose the latter. The driver wizard pointed me to a Brother DCP-1510 driver. Although not quite my printer model, using that driver, I was able to use the wireless printer as far as I needed it. Done for me!
Hope to have helped.
answered Jan 4 at 8:26
MarioMario
14319
add a comment |
I was able to print on a Brother DCP-1612W with my Ubuntu 18.04 using WLAN.
After setting up WLAN for the printer and connecting my printer and laptop with the corresponding WLAN, I used the system-config-printer tool. I started adding a new printer. The tool detected the printer letting it appear on the list and suggesting an LPD/LPR and a AppSocket/JetDirect connection. I chose the latter. The driver wizard pointed me to a Brother DCP-1510 driver. Although not quite my printer model, using that driver, I was able to use the wireless printer as far as I needed it. Done for me!
Hope to have helped.
answered Jan 4 at 8:26
MarioMario
14319
add a comment |
I was able to print on a Brother DCP-1612W with my Ubuntu 18.04 using WLAN.
After setting up WLAN for the printer and connecting my printer and laptop with the corresponding WLAN, I used the system-config-printer tool. I started adding a new printer. The tool detected the printer letting it appear on the list and suggesting an LPD/LPR and a AppSocket/JetDirect connection. I chose the latter. The driver wizard pointed me to a Brother DCP-1510 driver. Although not quite my printer model, using that driver, I was able to use the wireless printer as far as I needed it. Done for me!
Hope to have helped.
answered Jan 4 at 8:26
MarioMario
14319
I was able to print on a Brother DCP-1612W with my Ubuntu 18.04 using WLAN.
After setting up WLAN for the printer and connecting my printer and laptop with the corresponding WLAN, I used the system-config-printer tool. I started adding a new printer. The tool detected the printer letting it appear on the list and suggesting an LPD/LPR and a AppSocket/JetDirect connection. I chose the latter. The driver wizard pointed me to a Brother DCP-1510 driver. Although not quite my printer model, using that driver, I was able to use the wireless printer as far as I needed it. Done for me!
Hope to have helped.
answered Jan 4 at 8:26
MarioMario
14319
answered Jan 4 at 8:26
MarioMario
14319
answered Jan 4 at 8:26
MarioMario
14319
answered Jan 4 at 8:26
MarioMario
14319
14319
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f713198%2fcant-print-on-brother-dcp-1612w%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
