lxqt “whisker menu”?
up vote
1
down vote
favorite
I'm running 16.04 on a very old PC, so I'm using the Enlightenment (currently E22) desktop.
I'm looking at LXQT, but I'd like the "program search" feature that comes with XFCE's Whisker Menu. I'm told that a whisker menu-type search isn't possible in LXDE (which is why I don't use it), but can it be (easily) done in LXQT?
menu whisker lxqt
|
show 2 more comments
up vote
1
down vote
favorite
I'm running 16.04 on a very old PC, so I'm using the Enlightenment (currently E22) desktop.
I'm looking at LXQT, but I'd like the "program search" feature that comes with XFCE's Whisker Menu. I'm told that a whisker menu-type search isn't possible in LXDE (which is why I don't use it), but can it be (easily) done in LXQT?
menu whisker lxqt
If all you want to search in installed applications, you can trykupfer
in the repo. Though it is developed forKDE
. you can install it without dependency. I think it's default shortcutctrl-space
.
– kenn
Dec 8 '17 at 15:13
Thanks. So it's not visible on the menu?
– stroudmw
Dec 8 '17 at 15:14
I guess you could install thexfce4-appfinder
then assign the command to a keyboard shortcut.sudo apt-get install --no-install-recommends xfce4-appfinder
– Terrance
Dec 8 '17 at 15:14
I mean, like a search bar at the top (or bottom) of the menu where I can type in the first few characters of the program and get suggestions. Like the whisker menu does.
– stroudmw
Dec 8 '17 at 15:16
xfce4-appfinder
is the search part of the Whisker Menu. Install it and command line launch it.
– Terrance
Dec 8 '17 at 15:17
|
show 2 more comments
up vote
1
down vote
favorite
up vote
1
down vote
favorite
I'm running 16.04 on a very old PC, so I'm using the Enlightenment (currently E22) desktop.
I'm looking at LXQT, but I'd like the "program search" feature that comes with XFCE's Whisker Menu. I'm told that a whisker menu-type search isn't possible in LXDE (which is why I don't use it), but can it be (easily) done in LXQT?
menu whisker lxqt
I'm running 16.04 on a very old PC, so I'm using the Enlightenment (currently E22) desktop.
I'm looking at LXQT, but I'd like the "program search" feature that comes with XFCE's Whisker Menu. I'm told that a whisker menu-type search isn't possible in LXDE (which is why I don't use it), but can it be (easily) done in LXQT?
menu whisker lxqt
menu whisker lxqt
asked Dec 8 '17 at 14:59
stroudmw
200516
200516
If all you want to search in installed applications, you can trykupfer
in the repo. Though it is developed forKDE
. you can install it without dependency. I think it's default shortcutctrl-space
.
– kenn
Dec 8 '17 at 15:13
Thanks. So it's not visible on the menu?
– stroudmw
Dec 8 '17 at 15:14
I guess you could install thexfce4-appfinder
then assign the command to a keyboard shortcut.sudo apt-get install --no-install-recommends xfce4-appfinder
– Terrance
Dec 8 '17 at 15:14
I mean, like a search bar at the top (or bottom) of the menu where I can type in the first few characters of the program and get suggestions. Like the whisker menu does.
– stroudmw
Dec 8 '17 at 15:16
xfce4-appfinder
is the search part of the Whisker Menu. Install it and command line launch it.
– Terrance
Dec 8 '17 at 15:17
|
show 2 more comments
If all you want to search in installed applications, you can trykupfer
in the repo. Though it is developed forKDE
. you can install it without dependency. I think it's default shortcutctrl-space
.
– kenn
Dec 8 '17 at 15:13
Thanks. So it's not visible on the menu?
– stroudmw
Dec 8 '17 at 15:14
I guess you could install thexfce4-appfinder
then assign the command to a keyboard shortcut.sudo apt-get install --no-install-recommends xfce4-appfinder
– Terrance
Dec 8 '17 at 15:14
I mean, like a search bar at the top (or bottom) of the menu where I can type in the first few characters of the program and get suggestions. Like the whisker menu does.
– stroudmw
Dec 8 '17 at 15:16
xfce4-appfinder
is the search part of the Whisker Menu. Install it and command line launch it.
– Terrance
Dec 8 '17 at 15:17
If all you want to search in installed applications, you can try
kupfer
in the repo. Though it is developed for KDE
. you can install it without dependency. I think it's default shortcut ctrl-space
.– kenn
Dec 8 '17 at 15:13
If all you want to search in installed applications, you can try
kupfer
in the repo. Though it is developed for KDE
. you can install it without dependency. I think it's default shortcut ctrl-space
.– kenn
Dec 8 '17 at 15:13
Thanks. So it's not visible on the menu?
– stroudmw
Dec 8 '17 at 15:14
Thanks. So it's not visible on the menu?
– stroudmw
Dec 8 '17 at 15:14
I guess you could install the
xfce4-appfinder
then assign the command to a keyboard shortcut. sudo apt-get install --no-install-recommends xfce4-appfinder
– Terrance
Dec 8 '17 at 15:14
I guess you could install the
xfce4-appfinder
then assign the command to a keyboard shortcut. sudo apt-get install --no-install-recommends xfce4-appfinder
– Terrance
Dec 8 '17 at 15:14
I mean, like a search bar at the top (or bottom) of the menu where I can type in the first few characters of the program and get suggestions. Like the whisker menu does.
– stroudmw
Dec 8 '17 at 15:16
I mean, like a search bar at the top (or bottom) of the menu where I can type in the first few characters of the program and get suggestions. Like the whisker menu does.
– stroudmw
Dec 8 '17 at 15:16
xfce4-appfinder
is the search part of the Whisker Menu. Install it and command line launch it.– Terrance
Dec 8 '17 at 15:17
xfce4-appfinder
is the search part of the Whisker Menu. Install it and command line launch it.– Terrance
Dec 8 '17 at 15:17
|
show 2 more comments
3 Answers
3
active
oldest
votes
up vote
2
down vote
accepted
The xfce4-appfinder
is part of the Whisker Menu.
To install it, run the following command:
sudo apt install --no-install-recommends xfce4-appfinder
After it is installed simply run xfce4-appfinder
from a command prompt or you can assign it to a keyboard shortcut. In Xfce4 it is assigned to Super+R to bring it up.
Hope this helps!
I've tried the xfce-appfinder, and I can see it under "Applications" (It's called "Application Finder"). Thanks for your assistance!
– stroudmw
Dec 9 '17 at 7:23
1
@stroudmw I was actually going to answer that for you this morning. Glad you found it. =)
– Terrance
Dec 9 '17 at 15:16
add a comment |
up vote
1
down vote
The xfce app finder will do it:
sudo apt-get install --no-install-recommends xfce4-appfinder
Then you can find it from the main menu under Accessories: it's called "Application Finder" and has an hour-glass icon.
add a comment |
up vote
1
down vote
LXQt comes with its own launchers
- The Applications menu panel widget acts just like Whisker-menu.
- There is also
lxqt-runner
, very similar tokrunner
from KDE. Github. Its shortkey can be configured.
Other launchers, especially desktop-agnostic ones like Synapse, can be used to get the desired behavior.
Assigning only the Super key as shortcut, a nice feature of the Whisker Menu (but also of other launchers) can be added thus: for any launcher, including the ones mentioned above: install
ksuperkey
(preferably from source, which worked very smoothly for me - see details here), run it at startup, then assign Alt-F1 as shortcut for the launcher. For Synapse you need just to follow this answer (that is: edit.config/synapse/config.json
in order to have"activate" : "Super_L"
).
add a comment |
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
2
down vote
accepted
The xfce4-appfinder
is part of the Whisker Menu.
To install it, run the following command:
sudo apt install --no-install-recommends xfce4-appfinder
After it is installed simply run xfce4-appfinder
from a command prompt or you can assign it to a keyboard shortcut. In Xfce4 it is assigned to Super+R to bring it up.
Hope this helps!
I've tried the xfce-appfinder, and I can see it under "Applications" (It's called "Application Finder"). Thanks for your assistance!
– stroudmw
Dec 9 '17 at 7:23
1
@stroudmw I was actually going to answer that for you this morning. Glad you found it. =)
– Terrance
Dec 9 '17 at 15:16
add a comment |
up vote
2
down vote
accepted
The xfce4-appfinder
is part of the Whisker Menu.
To install it, run the following command:
sudo apt install --no-install-recommends xfce4-appfinder
After it is installed simply run xfce4-appfinder
from a command prompt or you can assign it to a keyboard shortcut. In Xfce4 it is assigned to Super+R to bring it up.
Hope this helps!
I've tried the xfce-appfinder, and I can see it under "Applications" (It's called "Application Finder"). Thanks for your assistance!
– stroudmw
Dec 9 '17 at 7:23
1
@stroudmw I was actually going to answer that for you this morning. Glad you found it. =)
– Terrance
Dec 9 '17 at 15:16
add a comment |
up vote
2
down vote
accepted
up vote
2
down vote
accepted
The xfce4-appfinder
is part of the Whisker Menu.
To install it, run the following command:
sudo apt install --no-install-recommends xfce4-appfinder
After it is installed simply run xfce4-appfinder
from a command prompt or you can assign it to a keyboard shortcut. In Xfce4 it is assigned to Super+R to bring it up.
Hope this helps!
The xfce4-appfinder
is part of the Whisker Menu.
To install it, run the following command:
sudo apt install --no-install-recommends xfce4-appfinder
After it is installed simply run xfce4-appfinder
from a command prompt or you can assign it to a keyboard shortcut. In Xfce4 it is assigned to Super+R to bring it up.
Hope this helps!
edited Dec 9 '17 at 15:27
answered Dec 9 '17 at 4:04
Terrance
18.5k34092
18.5k34092
I've tried the xfce-appfinder, and I can see it under "Applications" (It's called "Application Finder"). Thanks for your assistance!
– stroudmw
Dec 9 '17 at 7:23
1
@stroudmw I was actually going to answer that for you this morning. Glad you found it. =)
– Terrance
Dec 9 '17 at 15:16
add a comment |
I've tried the xfce-appfinder, and I can see it under "Applications" (It's called "Application Finder"). Thanks for your assistance!
– stroudmw
Dec 9 '17 at 7:23
1
@stroudmw I was actually going to answer that for you this morning. Glad you found it. =)
– Terrance
Dec 9 '17 at 15:16
I've tried the xfce-appfinder, and I can see it under "Applications" (It's called "Application Finder"). Thanks for your assistance!
– stroudmw
Dec 9 '17 at 7:23
I've tried the xfce-appfinder, and I can see it under "Applications" (It's called "Application Finder"). Thanks for your assistance!
– stroudmw
Dec 9 '17 at 7:23
1
1
@stroudmw I was actually going to answer that for you this morning. Glad you found it. =)
– Terrance
Dec 9 '17 at 15:16
@stroudmw I was actually going to answer that for you this morning. Glad you found it. =)
– Terrance
Dec 9 '17 at 15:16
add a comment |
up vote
1
down vote
The xfce app finder will do it:
sudo apt-get install --no-install-recommends xfce4-appfinder
Then you can find it from the main menu under Accessories: it's called "Application Finder" and has an hour-glass icon.
add a comment |
up vote
1
down vote
The xfce app finder will do it:
sudo apt-get install --no-install-recommends xfce4-appfinder
Then you can find it from the main menu under Accessories: it's called "Application Finder" and has an hour-glass icon.
add a comment |
up vote
1
down vote
up vote
1
down vote
The xfce app finder will do it:
sudo apt-get install --no-install-recommends xfce4-appfinder
Then you can find it from the main menu under Accessories: it's called "Application Finder" and has an hour-glass icon.
The xfce app finder will do it:
sudo apt-get install --no-install-recommends xfce4-appfinder
Then you can find it from the main menu under Accessories: it's called "Application Finder" and has an hour-glass icon.
answered Dec 9 '17 at 7:32
stroudmw
200516
200516
add a comment |
add a comment |
up vote
1
down vote
LXQt comes with its own launchers
- The Applications menu panel widget acts just like Whisker-menu.
- There is also
lxqt-runner
, very similar tokrunner
from KDE. Github. Its shortkey can be configured.
Other launchers, especially desktop-agnostic ones like Synapse, can be used to get the desired behavior.
Assigning only the Super key as shortcut, a nice feature of the Whisker Menu (but also of other launchers) can be added thus: for any launcher, including the ones mentioned above: install
ksuperkey
(preferably from source, which worked very smoothly for me - see details here), run it at startup, then assign Alt-F1 as shortcut for the launcher. For Synapse you need just to follow this answer (that is: edit.config/synapse/config.json
in order to have"activate" : "Super_L"
).
add a comment |
up vote
1
down vote
LXQt comes with its own launchers
- The Applications menu panel widget acts just like Whisker-menu.
- There is also
lxqt-runner
, very similar tokrunner
from KDE. Github. Its shortkey can be configured.
Other launchers, especially desktop-agnostic ones like Synapse, can be used to get the desired behavior.
Assigning only the Super key as shortcut, a nice feature of the Whisker Menu (but also of other launchers) can be added thus: for any launcher, including the ones mentioned above: install
ksuperkey
(preferably from source, which worked very smoothly for me - see details here), run it at startup, then assign Alt-F1 as shortcut for the launcher. For Synapse you need just to follow this answer (that is: edit.config/synapse/config.json
in order to have"activate" : "Super_L"
).
add a comment |
up vote
1
down vote
up vote
1
down vote
LXQt comes with its own launchers
- The Applications menu panel widget acts just like Whisker-menu.
- There is also
lxqt-runner
, very similar tokrunner
from KDE. Github. Its shortkey can be configured.
Other launchers, especially desktop-agnostic ones like Synapse, can be used to get the desired behavior.
Assigning only the Super key as shortcut, a nice feature of the Whisker Menu (but also of other launchers) can be added thus: for any launcher, including the ones mentioned above: install
ksuperkey
(preferably from source, which worked very smoothly for me - see details here), run it at startup, then assign Alt-F1 as shortcut for the launcher. For Synapse you need just to follow this answer (that is: edit.config/synapse/config.json
in order to have"activate" : "Super_L"
).
LXQt comes with its own launchers
- The Applications menu panel widget acts just like Whisker-menu.
- There is also
lxqt-runner
, very similar tokrunner
from KDE. Github. Its shortkey can be configured.
Other launchers, especially desktop-agnostic ones like Synapse, can be used to get the desired behavior.
Assigning only the Super key as shortcut, a nice feature of the Whisker Menu (but also of other launchers) can be added thus: for any launcher, including the ones mentioned above: install
ksuperkey
(preferably from source, which worked very smoothly for me - see details here), run it at startup, then assign Alt-F1 as shortcut for the launcher. For Synapse you need just to follow this answer (that is: edit.config/synapse/config.json
in order to have"activate" : "Super_L"
).
edited Nov 27 at 21:20
answered Jul 24 at 7:54
cipricus
9,92046170338
9,92046170338
add a comment |
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f984415%2flxqt-whisker-menu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
If all you want to search in installed applications, you can try
kupfer
in the repo. Though it is developed forKDE
. you can install it without dependency. I think it's default shortcutctrl-space
.– kenn
Dec 8 '17 at 15:13
Thanks. So it's not visible on the menu?
– stroudmw
Dec 8 '17 at 15:14
I guess you could install the
xfce4-appfinder
then assign the command to a keyboard shortcut.sudo apt-get install --no-install-recommends xfce4-appfinder
– Terrance
Dec 8 '17 at 15:14
I mean, like a search bar at the top (or bottom) of the menu where I can type in the first few characters of the program and get suggestions. Like the whisker menu does.
– stroudmw
Dec 8 '17 at 15:16
xfce4-appfinder
is the search part of the Whisker Menu. Install it and command line launch it.– Terrance
Dec 8 '17 at 15:17