Hello! I have problems with my ubuntu18.04(amd64) desktop virtualization machines











up vote
0
down vote

favorite












I have problems with my Ubuntu 18.04 desktop virtualization machines on my windows 10 on Oracle Virtual Box version 5.2.22. They lag. I have the following parameters set:




Ram: 4096 MB



1 CPU, limit of execution 100%



In acceleration I have marked the checkbox Vt-x/AMD-v



Video memory 128 MB



VBOX additions installed




At the beginning the machine goes well but after 2 or 3 min of opening the programs or chrome or whatever it starts to go very slow.
I've read that virtualization needs to be enabled from setup. I don't have that option on my setup but I've also read that if I go to the Task Manager and then to Performance and click on CPU on the right-bottom corner I can see virtualization is enabled.










share|improve this question
























  • @ThomasWard As i understand it, it is Ubuntu VMs on a Win10 host...
    – xenoid
    Nov 29 at 15:25












  • Probably still low resources. Standard Ubuntu needs more than 1CPU, Lubuntu works better with 1CPU than standard Ubuntu does (GNOME is greedy)
    – Thomas Ward
    Nov 29 at 15:30















up vote
0
down vote

favorite












I have problems with my Ubuntu 18.04 desktop virtualization machines on my windows 10 on Oracle Virtual Box version 5.2.22. They lag. I have the following parameters set:




Ram: 4096 MB



1 CPU, limit of execution 100%



In acceleration I have marked the checkbox Vt-x/AMD-v



Video memory 128 MB



VBOX additions installed




At the beginning the machine goes well but after 2 or 3 min of opening the programs or chrome or whatever it starts to go very slow.
I've read that virtualization needs to be enabled from setup. I don't have that option on my setup but I've also read that if I go to the Task Manager and then to Performance and click on CPU on the right-bottom corner I can see virtualization is enabled.










share|improve this question
























  • @ThomasWard As i understand it, it is Ubuntu VMs on a Win10 host...
    – xenoid
    Nov 29 at 15:25












  • Probably still low resources. Standard Ubuntu needs more than 1CPU, Lubuntu works better with 1CPU than standard Ubuntu does (GNOME is greedy)
    – Thomas Ward
    Nov 29 at 15:30













up vote
0
down vote

favorite









up vote
0
down vote

favorite











I have problems with my Ubuntu 18.04 desktop virtualization machines on my windows 10 on Oracle Virtual Box version 5.2.22. They lag. I have the following parameters set:




Ram: 4096 MB



1 CPU, limit of execution 100%



In acceleration I have marked the checkbox Vt-x/AMD-v



Video memory 128 MB



VBOX additions installed




At the beginning the machine goes well but after 2 or 3 min of opening the programs or chrome or whatever it starts to go very slow.
I've read that virtualization needs to be enabled from setup. I don't have that option on my setup but I've also read that if I go to the Task Manager and then to Performance and click on CPU on the right-bottom corner I can see virtualization is enabled.










share|improve this question















I have problems with my Ubuntu 18.04 desktop virtualization machines on my windows 10 on Oracle Virtual Box version 5.2.22. They lag. I have the following parameters set:




Ram: 4096 MB



1 CPU, limit of execution 100%



In acceleration I have marked the checkbox Vt-x/AMD-v



Video memory 128 MB



VBOX additions installed




At the beginning the machine goes well but after 2 or 3 min of opening the programs or chrome or whatever it starts to go very slow.
I've read that virtualization needs to be enabled from setup. I don't have that option on my setup but I've also read that if I go to the Task Manager and then to Performance and click on CPU on the right-bottom corner I can see virtualization is enabled.







18.04 virtualbox






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Nov 29 at 15:09









abu-ahmed al-khatiri

89015




89015










asked Nov 29 at 12:51









TheGen

1




1












  • @ThomasWard As i understand it, it is Ubuntu VMs on a Win10 host...
    – xenoid
    Nov 29 at 15:25












  • Probably still low resources. Standard Ubuntu needs more than 1CPU, Lubuntu works better with 1CPU than standard Ubuntu does (GNOME is greedy)
    – Thomas Ward
    Nov 29 at 15:30


















  • @ThomasWard As i understand it, it is Ubuntu VMs on a Win10 host...
    – xenoid
    Nov 29 at 15:25












  • Probably still low resources. Standard Ubuntu needs more than 1CPU, Lubuntu works better with 1CPU than standard Ubuntu does (GNOME is greedy)
    – Thomas Ward
    Nov 29 at 15:30
















@ThomasWard As i understand it, it is Ubuntu VMs on a Win10 host...
– xenoid
Nov 29 at 15:25






@ThomasWard As i understand it, it is Ubuntu VMs on a Win10 host...
– xenoid
Nov 29 at 15:25














Probably still low resources. Standard Ubuntu needs more than 1CPU, Lubuntu works better with 1CPU than standard Ubuntu does (GNOME is greedy)
– Thomas Ward
Nov 29 at 15:30




Probably still low resources. Standard Ubuntu needs more than 1CPU, Lubuntu works better with 1CPU than standard Ubuntu does (GNOME is greedy)
– Thomas Ward
Nov 29 at 15:30










2 Answers
2






active

oldest

votes

















up vote
0
down vote













You can check if you have the virtualization enabled in the BIOS by trying to temporarily give more than one CPU to a VM (IIRC this is disabled if you have no hardware support or virtualization).



Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.



Otherwise, give more indication about the host hardware, and the VM settings (video support: 2D? 3D?).






share|improve this answer





















  • Thank you for answering. I have 3D acceleration. And i can add more than 1 CPU to de VM but I dont understand this part: Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.
    – TheGen
    Nov 29 at 15:08










  • Try to use only 2D acceleration, virtualized 3D is rarely good. Otherwise, the machine lags because it lacks some resource, and the perf monitor may tell you which resource is maxxed out on the VM (and perhaps also on the host).
    – xenoid
    Nov 29 at 15:30










  • Im not able to use 2D acceleration on ubunuts just on windows
    – TheGen
    Nov 29 at 18:02


















up vote
0
down vote













I'm no pro, but maybe give virt-manager a try instead of virtualbox. The gui is far simpler, but also can all be done direct from the command line. It seems to put less of a strain on my system anyways.






share|improve this answer





















    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "89"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    convertImagesToLinks: true,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: 10,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1097112%2fhello-i-have-problems-with-my-ubuntu18-04amd64-desktop-virtualization-machine%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    2 Answers
    2






    active

    oldest

    votes








    2 Answers
    2






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes








    up vote
    0
    down vote













    You can check if you have the virtualization enabled in the BIOS by trying to temporarily give more than one CPU to a VM (IIRC this is disabled if you have no hardware support or virtualization).



    Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.



    Otherwise, give more indication about the host hardware, and the VM settings (video support: 2D? 3D?).






    share|improve this answer





















    • Thank you for answering. I have 3D acceleration. And i can add more than 1 CPU to de VM but I dont understand this part: Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.
      – TheGen
      Nov 29 at 15:08










    • Try to use only 2D acceleration, virtualized 3D is rarely good. Otherwise, the machine lags because it lacks some resource, and the perf monitor may tell you which resource is maxxed out on the VM (and perhaps also on the host).
      – xenoid
      Nov 29 at 15:30










    • Im not able to use 2D acceleration on ubunuts just on windows
      – TheGen
      Nov 29 at 18:02















    up vote
    0
    down vote













    You can check if you have the virtualization enabled in the BIOS by trying to temporarily give more than one CPU to a VM (IIRC this is disabled if you have no hardware support or virtualization).



    Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.



    Otherwise, give more indication about the host hardware, and the VM settings (video support: 2D? 3D?).






    share|improve this answer





















    • Thank you for answering. I have 3D acceleration. And i can add more than 1 CPU to de VM but I dont understand this part: Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.
      – TheGen
      Nov 29 at 15:08










    • Try to use only 2D acceleration, virtualized 3D is rarely good. Otherwise, the machine lags because it lacks some resource, and the perf monitor may tell you which resource is maxxed out on the VM (and perhaps also on the host).
      – xenoid
      Nov 29 at 15:30










    • Im not able to use 2D acceleration on ubunuts just on windows
      – TheGen
      Nov 29 at 18:02













    up vote
    0
    down vote










    up vote
    0
    down vote









    You can check if you have the virtualization enabled in the BIOS by trying to temporarily give more than one CPU to a VM (IIRC this is disabled if you have no hardware support or virtualization).



    Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.



    Otherwise, give more indication about the host hardware, and the VM settings (video support: 2D? 3D?).






    share|improve this answer












    You can check if you have the virtualization enabled in the BIOS by trying to temporarily give more than one CPU to a VM (IIRC this is disabled if you have no hardware support or virtualization).



    Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.



    Otherwise, give more indication about the host hardware, and the VM settings (video support: 2D? 3D?).







    share|improve this answer












    share|improve this answer



    share|improve this answer










    answered Nov 29 at 13:17









    xenoid

    1,4001415




    1,4001415












    • Thank you for answering. I have 3D acceleration. And i can add more than 1 CPU to de VM but I dont understand this part: Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.
      – TheGen
      Nov 29 at 15:08










    • Try to use only 2D acceleration, virtualized 3D is rarely good. Otherwise, the machine lags because it lacks some resource, and the perf monitor may tell you which resource is maxxed out on the VM (and perhaps also on the host).
      – xenoid
      Nov 29 at 15:30










    • Im not able to use 2D acceleration on ubunuts just on windows
      – TheGen
      Nov 29 at 18:02


















    • Thank you for answering. I have 3D acceleration. And i can add more than 1 CPU to de VM but I dont understand this part: Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.
      – TheGen
      Nov 29 at 15:08










    • Try to use only 2D acceleration, virtualized 3D is rarely good. Otherwise, the machine lags because it lacks some resource, and the perf monitor may tell you which resource is maxxed out on the VM (and perhaps also on the host).
      – xenoid
      Nov 29 at 15:30










    • Im not able to use 2D acceleration on ubunuts just on windows
      – TheGen
      Nov 29 at 18:02
















    Thank you for answering. I have 3D acceleration. And i can add more than 1 CPU to de VM but I dont understand this part: Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.
    – TheGen
    Nov 29 at 15:08




    Thank you for answering. I have 3D acceleration. And i can add more than 1 CPU to de VM but I dont understand this part: Other than that, when the guest system performance monitor to see what is limiting it (RAM/Swapping, CPU...) and the hosts performance monitor for same.
    – TheGen
    Nov 29 at 15:08












    Try to use only 2D acceleration, virtualized 3D is rarely good. Otherwise, the machine lags because it lacks some resource, and the perf monitor may tell you which resource is maxxed out on the VM (and perhaps also on the host).
    – xenoid
    Nov 29 at 15:30




    Try to use only 2D acceleration, virtualized 3D is rarely good. Otherwise, the machine lags because it lacks some resource, and the perf monitor may tell you which resource is maxxed out on the VM (and perhaps also on the host).
    – xenoid
    Nov 29 at 15:30












    Im not able to use 2D acceleration on ubunuts just on windows
    – TheGen
    Nov 29 at 18:02




    Im not able to use 2D acceleration on ubunuts just on windows
    – TheGen
    Nov 29 at 18:02












    up vote
    0
    down vote













    I'm no pro, but maybe give virt-manager a try instead of virtualbox. The gui is far simpler, but also can all be done direct from the command line. It seems to put less of a strain on my system anyways.






    share|improve this answer

























      up vote
      0
      down vote













      I'm no pro, but maybe give virt-manager a try instead of virtualbox. The gui is far simpler, but also can all be done direct from the command line. It seems to put less of a strain on my system anyways.






      share|improve this answer























        up vote
        0
        down vote










        up vote
        0
        down vote









        I'm no pro, but maybe give virt-manager a try instead of virtualbox. The gui is far simpler, but also can all be done direct from the command line. It seems to put less of a strain on my system anyways.






        share|improve this answer












        I'm no pro, but maybe give virt-manager a try instead of virtualbox. The gui is far simpler, but also can all be done direct from the command line. It seems to put less of a strain on my system anyways.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered Nov 29 at 13:43









        SimplySimplified

        205416




        205416






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Ask Ubuntu!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.





            Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


            Please pay close attention to the following guidance:


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1097112%2fhello-i-have-problems-with-my-ubuntu18-04amd64-desktop-virtualization-machine%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            Ellipse (mathématiques)

            Quarter-circle Tiles

            Mont Emei