Can you get a threaded bb30?











up vote
3
down vote

favorite












I've a threaded shell, but i have got bb30 cranks, can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?










share|improve this question






















  • I've a threaded shell Does that mean your frame itself has an Italian or BSA/English threaded bottom bracket shell? And you want to use a BB30 crankset on it?
    – Andrew Henle
    15 hours ago












  • I've a english thread. Yes, i want to use a bb30 crankset.
    – Ervins K
    15 hours ago















up vote
3
down vote

favorite












I've a threaded shell, but i have got bb30 cranks, can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?










share|improve this question






















  • I've a threaded shell Does that mean your frame itself has an Italian or BSA/English threaded bottom bracket shell? And you want to use a BB30 crankset on it?
    – Andrew Henle
    15 hours ago












  • I've a english thread. Yes, i want to use a bb30 crankset.
    – Ervins K
    15 hours ago













up vote
3
down vote

favorite









up vote
3
down vote

favorite











I've a threaded shell, but i have got bb30 cranks, can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?










share|improve this question













I've a threaded shell, but i have got bb30 cranks, can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?







bottom-bracket






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked 15 hours ago









Ervins K

343




343












  • I've a threaded shell Does that mean your frame itself has an Italian or BSA/English threaded bottom bracket shell? And you want to use a BB30 crankset on it?
    – Andrew Henle
    15 hours ago












  • I've a english thread. Yes, i want to use a bb30 crankset.
    – Ervins K
    15 hours ago


















  • I've a threaded shell Does that mean your frame itself has an Italian or BSA/English threaded bottom bracket shell? And you want to use a BB30 crankset on it?
    – Andrew Henle
    15 hours ago












  • I've a english thread. Yes, i want to use a bb30 crankset.
    – Ervins K
    15 hours ago
















I've a threaded shell Does that mean your frame itself has an Italian or BSA/English threaded bottom bracket shell? And you want to use a BB30 crankset on it?
– Andrew Henle
15 hours ago






I've a threaded shell Does that mean your frame itself has an Italian or BSA/English threaded bottom bracket shell? And you want to use a BB30 crankset on it?
– Andrew Henle
15 hours ago














I've a english thread. Yes, i want to use a bb30 crankset.
– Ervins K
15 hours ago




I've a english thread. Yes, i want to use a bb30 crankset.
– Ervins K
15 hours ago










2 Answers
2






active

oldest

votes

















up vote
4
down vote













There are some solutions in forms of bottom brackets designed to run 30 mm cranks in a threaded BSA bottom bracket shell. The deciding factor is the spindle length.



Searching the net for "bb30 crankset in bsa frame" gives e.g. this:




Threaded to 30mm Angular Contact BB - Black



Our solution for running a 30mm spindle crankset in a BSA threaded frame.



Notes:



For use with 30mm diameter cranks with a spindle length of at least 104mm. Will not work with standard BB30 cranksets.







share|improve this answer





















  • This is 100% correct, the limitation is the spindle length. I run 30mm THM Clavicula SE cranks on a THM BB on a BSA frame. I was also going to run FSA Cranks BB386EVO Cranks on a FSA MegaEvo Road BB that also work.
    – sjakubowski
    10 hours ago


















up vote
1
down vote














can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?




That won't work, as the threaded bottom bracket shell simply isn't large enough.



BB30 cranksets have a 30mm spindle diameter. Per Wikipedia, the maximum internal width of an English or Italian-threaded bottom bracket is about 34 mm. Those few millimeters are not enough space for bearings.



I also think the BB30 crankset spindle will be too short.






share|improve this answer





















  • But bearings can be in external cups and as such won't be limited to 4 mm
    – Grigory Rechistov
    12 hours ago










  • Yep, BB30 spindles are designed for BB shells either 68 or 73mm wide, so you can’t have an external bearing solution.
    – Argenti Apparatus
    12 hours ago










  • The bottom bracket is more than large enough. The issue is only the spindle / offset on the crank.
    – sjakubowski
    10 hours ago










  • @sjakubowski The bottom bracket is more than large enough. Seriously? What kind of bearing fits in the 2mm or so between the 30mm spindle and the 34 mm bottom bracket shell? Unless the OP already has a crankset designed for BB30 and outboard bearings, there's nowhere to put the bearings. It "won't work".
    – Andrew Henle
    10 hours ago










  • I didn't say it would work, I said the reason you mentioned is incorrect. I gave examples of 30mm diameter cranks working just fine on BSA. If you replaced the spindle on a BB30 crank with a longer one it would work just fine.
    – sjakubowski
    10 hours ago











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "126"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58516%2fcan-you-get-a-threaded-bb30%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























2 Answers
2






active

oldest

votes








2 Answers
2






active

oldest

votes









active

oldest

votes






active

oldest

votes








up vote
4
down vote













There are some solutions in forms of bottom brackets designed to run 30 mm cranks in a threaded BSA bottom bracket shell. The deciding factor is the spindle length.



Searching the net for "bb30 crankset in bsa frame" gives e.g. this:




Threaded to 30mm Angular Contact BB - Black



Our solution for running a 30mm spindle crankset in a BSA threaded frame.



Notes:



For use with 30mm diameter cranks with a spindle length of at least 104mm. Will not work with standard BB30 cranksets.







share|improve this answer





















  • This is 100% correct, the limitation is the spindle length. I run 30mm THM Clavicula SE cranks on a THM BB on a BSA frame. I was also going to run FSA Cranks BB386EVO Cranks on a FSA MegaEvo Road BB that also work.
    – sjakubowski
    10 hours ago















up vote
4
down vote













There are some solutions in forms of bottom brackets designed to run 30 mm cranks in a threaded BSA bottom bracket shell. The deciding factor is the spindle length.



Searching the net for "bb30 crankset in bsa frame" gives e.g. this:




Threaded to 30mm Angular Contact BB - Black



Our solution for running a 30mm spindle crankset in a BSA threaded frame.



Notes:



For use with 30mm diameter cranks with a spindle length of at least 104mm. Will not work with standard BB30 cranksets.







share|improve this answer





















  • This is 100% correct, the limitation is the spindle length. I run 30mm THM Clavicula SE cranks on a THM BB on a BSA frame. I was also going to run FSA Cranks BB386EVO Cranks on a FSA MegaEvo Road BB that also work.
    – sjakubowski
    10 hours ago













up vote
4
down vote










up vote
4
down vote









There are some solutions in forms of bottom brackets designed to run 30 mm cranks in a threaded BSA bottom bracket shell. The deciding factor is the spindle length.



Searching the net for "bb30 crankset in bsa frame" gives e.g. this:




Threaded to 30mm Angular Contact BB - Black



Our solution for running a 30mm spindle crankset in a BSA threaded frame.



Notes:



For use with 30mm diameter cranks with a spindle length of at least 104mm. Will not work with standard BB30 cranksets.







share|improve this answer












There are some solutions in forms of bottom brackets designed to run 30 mm cranks in a threaded BSA bottom bracket shell. The deciding factor is the spindle length.



Searching the net for "bb30 crankset in bsa frame" gives e.g. this:




Threaded to 30mm Angular Contact BB - Black



Our solution for running a 30mm spindle crankset in a BSA threaded frame.



Notes:



For use with 30mm diameter cranks with a spindle length of at least 104mm. Will not work with standard BB30 cranksets.








share|improve this answer












share|improve this answer



share|improve this answer










answered 12 hours ago









Grigory Rechistov

4,289829




4,289829












  • This is 100% correct, the limitation is the spindle length. I run 30mm THM Clavicula SE cranks on a THM BB on a BSA frame. I was also going to run FSA Cranks BB386EVO Cranks on a FSA MegaEvo Road BB that also work.
    – sjakubowski
    10 hours ago


















  • This is 100% correct, the limitation is the spindle length. I run 30mm THM Clavicula SE cranks on a THM BB on a BSA frame. I was also going to run FSA Cranks BB386EVO Cranks on a FSA MegaEvo Road BB that also work.
    – sjakubowski
    10 hours ago
















This is 100% correct, the limitation is the spindle length. I run 30mm THM Clavicula SE cranks on a THM BB on a BSA frame. I was also going to run FSA Cranks BB386EVO Cranks on a FSA MegaEvo Road BB that also work.
– sjakubowski
10 hours ago




This is 100% correct, the limitation is the spindle length. I run 30mm THM Clavicula SE cranks on a THM BB on a BSA frame. I was also going to run FSA Cranks BB386EVO Cranks on a FSA MegaEvo Road BB that also work.
– sjakubowski
10 hours ago










up vote
1
down vote














can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?




That won't work, as the threaded bottom bracket shell simply isn't large enough.



BB30 cranksets have a 30mm spindle diameter. Per Wikipedia, the maximum internal width of an English or Italian-threaded bottom bracket is about 34 mm. Those few millimeters are not enough space for bearings.



I also think the BB30 crankset spindle will be too short.






share|improve this answer





















  • But bearings can be in external cups and as such won't be limited to 4 mm
    – Grigory Rechistov
    12 hours ago










  • Yep, BB30 spindles are designed for BB shells either 68 or 73mm wide, so you can’t have an external bearing solution.
    – Argenti Apparatus
    12 hours ago










  • The bottom bracket is more than large enough. The issue is only the spindle / offset on the crank.
    – sjakubowski
    10 hours ago










  • @sjakubowski The bottom bracket is more than large enough. Seriously? What kind of bearing fits in the 2mm or so between the 30mm spindle and the 34 mm bottom bracket shell? Unless the OP already has a crankset designed for BB30 and outboard bearings, there's nowhere to put the bearings. It "won't work".
    – Andrew Henle
    10 hours ago










  • I didn't say it would work, I said the reason you mentioned is incorrect. I gave examples of 30mm diameter cranks working just fine on BSA. If you replaced the spindle on a BB30 crank with a longer one it would work just fine.
    – sjakubowski
    10 hours ago















up vote
1
down vote














can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?




That won't work, as the threaded bottom bracket shell simply isn't large enough.



BB30 cranksets have a 30mm spindle diameter. Per Wikipedia, the maximum internal width of an English or Italian-threaded bottom bracket is about 34 mm. Those few millimeters are not enough space for bearings.



I also think the BB30 crankset spindle will be too short.






share|improve this answer





















  • But bearings can be in external cups and as such won't be limited to 4 mm
    – Grigory Rechistov
    12 hours ago










  • Yep, BB30 spindles are designed for BB shells either 68 or 73mm wide, so you can’t have an external bearing solution.
    – Argenti Apparatus
    12 hours ago










  • The bottom bracket is more than large enough. The issue is only the spindle / offset on the crank.
    – sjakubowski
    10 hours ago










  • @sjakubowski The bottom bracket is more than large enough. Seriously? What kind of bearing fits in the 2mm or so between the 30mm spindle and the 34 mm bottom bracket shell? Unless the OP already has a crankset designed for BB30 and outboard bearings, there's nowhere to put the bearings. It "won't work".
    – Andrew Henle
    10 hours ago










  • I didn't say it would work, I said the reason you mentioned is incorrect. I gave examples of 30mm diameter cranks working just fine on BSA. If you replaced the spindle on a BB30 crank with a longer one it would work just fine.
    – sjakubowski
    10 hours ago













up vote
1
down vote










up vote
1
down vote










can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?




That won't work, as the threaded bottom bracket shell simply isn't large enough.



BB30 cranksets have a 30mm spindle diameter. Per Wikipedia, the maximum internal width of an English or Italian-threaded bottom bracket is about 34 mm. Those few millimeters are not enough space for bearings.



I also think the BB30 crankset spindle will be too short.






share|improve this answer













can you get threaded bb30 bottom brackets that the it can with fit the bb30 cranks?




That won't work, as the threaded bottom bracket shell simply isn't large enough.



BB30 cranksets have a 30mm spindle diameter. Per Wikipedia, the maximum internal width of an English or Italian-threaded bottom bracket is about 34 mm. Those few millimeters are not enough space for bearings.



I also think the BB30 crankset spindle will be too short.







share|improve this answer












share|improve this answer



share|improve this answer










answered 14 hours ago









Andrew Henle

88146




88146












  • But bearings can be in external cups and as such won't be limited to 4 mm
    – Grigory Rechistov
    12 hours ago










  • Yep, BB30 spindles are designed for BB shells either 68 or 73mm wide, so you can’t have an external bearing solution.
    – Argenti Apparatus
    12 hours ago










  • The bottom bracket is more than large enough. The issue is only the spindle / offset on the crank.
    – sjakubowski
    10 hours ago










  • @sjakubowski The bottom bracket is more than large enough. Seriously? What kind of bearing fits in the 2mm or so between the 30mm spindle and the 34 mm bottom bracket shell? Unless the OP already has a crankset designed for BB30 and outboard bearings, there's nowhere to put the bearings. It "won't work".
    – Andrew Henle
    10 hours ago










  • I didn't say it would work, I said the reason you mentioned is incorrect. I gave examples of 30mm diameter cranks working just fine on BSA. If you replaced the spindle on a BB30 crank with a longer one it would work just fine.
    – sjakubowski
    10 hours ago


















  • But bearings can be in external cups and as such won't be limited to 4 mm
    – Grigory Rechistov
    12 hours ago










  • Yep, BB30 spindles are designed for BB shells either 68 or 73mm wide, so you can’t have an external bearing solution.
    – Argenti Apparatus
    12 hours ago










  • The bottom bracket is more than large enough. The issue is only the spindle / offset on the crank.
    – sjakubowski
    10 hours ago










  • @sjakubowski The bottom bracket is more than large enough. Seriously? What kind of bearing fits in the 2mm or so between the 30mm spindle and the 34 mm bottom bracket shell? Unless the OP already has a crankset designed for BB30 and outboard bearings, there's nowhere to put the bearings. It "won't work".
    – Andrew Henle
    10 hours ago










  • I didn't say it would work, I said the reason you mentioned is incorrect. I gave examples of 30mm diameter cranks working just fine on BSA. If you replaced the spindle on a BB30 crank with a longer one it would work just fine.
    – sjakubowski
    10 hours ago
















But bearings can be in external cups and as such won't be limited to 4 mm
– Grigory Rechistov
12 hours ago




But bearings can be in external cups and as such won't be limited to 4 mm
– Grigory Rechistov
12 hours ago












Yep, BB30 spindles are designed for BB shells either 68 or 73mm wide, so you can’t have an external bearing solution.
– Argenti Apparatus
12 hours ago




Yep, BB30 spindles are designed for BB shells either 68 or 73mm wide, so you can’t have an external bearing solution.
– Argenti Apparatus
12 hours ago












The bottom bracket is more than large enough. The issue is only the spindle / offset on the crank.
– sjakubowski
10 hours ago




The bottom bracket is more than large enough. The issue is only the spindle / offset on the crank.
– sjakubowski
10 hours ago












@sjakubowski The bottom bracket is more than large enough. Seriously? What kind of bearing fits in the 2mm or so between the 30mm spindle and the 34 mm bottom bracket shell? Unless the OP already has a crankset designed for BB30 and outboard bearings, there's nowhere to put the bearings. It "won't work".
– Andrew Henle
10 hours ago




@sjakubowski The bottom bracket is more than large enough. Seriously? What kind of bearing fits in the 2mm or so between the 30mm spindle and the 34 mm bottom bracket shell? Unless the OP already has a crankset designed for BB30 and outboard bearings, there's nowhere to put the bearings. It "won't work".
– Andrew Henle
10 hours ago












I didn't say it would work, I said the reason you mentioned is incorrect. I gave examples of 30mm diameter cranks working just fine on BSA. If you replaced the spindle on a BB30 crank with a longer one it would work just fine.
– sjakubowski
10 hours ago




I didn't say it would work, I said the reason you mentioned is incorrect. I gave examples of 30mm diameter cranks working just fine on BSA. If you replaced the spindle on a BB30 crank with a longer one it would work just fine.
– sjakubowski
10 hours ago


















draft saved

draft discarded




















































Thanks for contributing an answer to Bicycles Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.





Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


Please pay close attention to the following guidance:


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58516%2fcan-you-get-a-threaded-bb30%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

Ellipse (mathématiques)

Quarter-circle Tiles

Mont Emei